M35 Turbo Upgrade.

[admS15]

The g1 high flow will drive like a stock turbo with alittle bit more torque. It also works fine with stock ecu.

And you will still offer this regardless of what you do with your current development?

[BoostdR]

Looking at fitting a supercharger with electronic bypass to my ss4 rev4. Bit of a mission to fit but...

[hypergear]

The G1 profile is equivalent to a 2871 52T, not alot larger then the OEM wheels, you can count it as a slightly bigger steel wheel rebuild rather then high flow. Works fine on factory ecu and stock auto.

The current project high moving towards some thing that makes power but more importantly drives nicely on stock auto. Im currently building a special SS2 using T3x bearing housing and Ceramic ball bearings for throttle response.

[Intense m35]

[BoostdR]

Should help with the bigger diameter disc

[Lakes101]

https://youtu.be/CBbzciQpYqk

putting my intense Rs turbo in this morning! Keep you all posted on results. Gorgeous bit of kit!! Edited November 22, 2015 by Lakes101

[Lakes101]

[Intense m35]

Should help with the bigger diameter disc

The actual size of the disc on the intense billet rs is smaller then a certain turbo pictured next to it... It's in the disc placement and porting of it where the gains are. The actuator travel being the biggest gain. Also disc size means nothing if porting isn't done to suit. Pictures of porting will follow from both turbos to show a comparison.

[scotty nm35]

Should help with the bigger diameter disc

I suspect the larger disk without porting the hole sufficiently actually limits the flow of the gate.

putting my intense Rs turbo in this morning! Keep you all posted on results. Gorgeous bit of kit!!

Too slow Nathan, mine is in and running 30psi already.

Feels more responsive on the road, makes more boost on the converter when stopped and it's not even tuned yet. Need to fatten up the spool areas of the fuel map so it must be flowing more in that region. See how the tune goes tomorrow.

Looks like we are on a winner here Rick. Thanks for the help designing it, was worth all the late nights. Time to get down to Calder for a run.

[Philr32]

Pricing yet?

[scotty nm35]

Pricing yet?

PM'd.

[BoostdR]

The actual size of the disc on the intense billet rs is smaller then a certain turbo pictured next to it... It's in the disc placement and porting of it where the gains are. The actuator travel being the biggest gain. Also disc size means nothing if porting isn't done to suit. Pictures of porting will follow from both turbos to show a comparison.

I was referring to a bigger disc vs OEM. Here is the porting on my Hypergear

The bigger problem with the M35 high flow is not boost creep but response.

Is this unit ball bearing?

I prefer the turbine style of the unit on the right in the video its a more efficient design. I expect it would make more average power over the unit on the left which looks similar specs to my Hypergear rev4. Lakes101 pic shows a different turbine again if I can see it correctly which is a good design(curved)

Edited November 23, 2015 by BoostdR

[Lakes101]

I suspect the larger disk without porting the hole sufficiently actually limits the flow of the gate.

Too slow Nathan, mine is in and running 30psi already.

Feels more responsive on the road, makes more boost on the converter when stopped and it's not even tuned yet. Need to fatten up the spool areas of the fuel map so it must be flowing more in that region. See how the tune goes tomorrow.

Looks like we are on a winner here Rick. Thanks for the help designing it, was worth all the late nights. Time to get down to Calder for a run.

not bad time wise for my first turbo install I think calling you so many times slowed me down lol [emoji12]

Thanks for the help Scott I'll be taking it for a beating tomorrow and let you know how it all goes!

[Intense m35]

Lakes 101 has the same turbo as the left one in the video. I no this as we built 4 identical units. For those who couldn't tell, the other turbo in the video is the noisey Hypergear ss2 rev2. It is definetly not more efficient or responsive then the intense billet rs, should have some results tomorrow. As far as wastegate porting goes not very impressed by the porting on yours as he has ported through the inlet track of the turbine. And it isn't even matched to the flapper valve.

I was referring to a bigger disc vs OEM. Here is the porting on my Hypergear ImageUploadedBySAU Community1448255230.174580.jpgImageUploadedBySAU Community1448255253.699418.jpg

The bigger problem with the M35 high flow is not boost creep but response.

Is this unit ball bearing?

I prefer the turbine style of the unit on the right in the video its a more efficient design. I expect it would make more average power over the unit on the left which looks similar specs to my Hypergear rev4. Lakes101 pic shows a different turbine again if I can see it correctly which is a good design(curved)

[hypergear]

The actual size of the disc on the intense billet rs is smaller then a certain turbo pictured next to it... It's in the disc placement and porting of it where the gains are. The actuator travel being the biggest gain. Also disc size means nothing if porting isn't done to suit. Pictures of porting will follow from both turbos to show a comparison.

On the video you've uploaded earlier, I've noticed the right hand actuator has a spring hooked on to the base. Will you be able to repeat the test with that spring removed?

[Intense m35]

On the video you've uploaded earlier, I've noticed the right hand actuator has a spring hooked on to the base. Will you be able to repeat the test with that spring removed?

Yes that's not a problem at all. I can repeat the test with a standard actuator. Will do so asap.

[Intense m35]

I was referring to a bigger disc vs OEM. Here is the porting on my Hypergear ImageUploadedBySAU Community1448255230.174580.jpgImageUploadedBySAU Community1448255253.699418.jpg

The bigger problem with the M35 high flow is not boost creep but response.

Is this unit ball bearing?

I prefer the turbine style of the unit on the right in the video its a more efficient design. I expect it would make more average power over the unit on the left which looks similar specs to my Hypergear rev4. Lakes101 pic shows a different turbine again if I can see it correctly which is a good design(curved)

Here are the wastegate pics spoken about earlier.

[BoostdR]

Lakes 101 has the same turbo as the left one in the video. I no this as we built 4 identical units. For those who couldn't tell, the other turbo in the video is the noisey Hypergear ss2 rev2. It is definetly not more efficient or responsive then the intense billet rs, should have some results tomorrow. As far as wastegate porting goes not very impressed by the porting on yours as he has ported through the inlet track of the turbine. And it isn't even matched to the flapper valve.

The inlet track to the turbine is opened up all the way around. It even injects air under the turbine by about 40% Do you think this is why I have 20psi at 4700rpm and when running 25psi it goes from 25 at 4850 to 18psi at 6500..

[BoostdR]

interesting how many posts are being deleted from this thread...

[Daleo]

That's a bit disappointing.