Master Cylinder Kit - Where To Source In Sydney?

[Marko R1]

i need to rebuild my master cylinder on my r32gtr as it is leaking - any recommended workshops in sydney?

[Duncan]

Yep, Matt at Racebrakes in Wetherill Park. Knows his stuff and will probably have the rebuild kit in stock

[Marko R1]

Thx Duncan race brakes is where I bought my pads from yrs ago...what is the name of that brake fluid u recommended to me yrs ago? I know I had to buy it from MCA motorcycles as only they had it in stock at the time.

[Duncan]

I'm hope I didn't recommend anything too exotic for a street car; probably the Motul RBF600 which is often cheaper from bike shops.

[Marko R1]

That's the one, I remember that model number...thanks mate

[Marko R1]

So I spoke to Matt and he suggested buying a second hand unit. To rebuild is 275 versus 125 for a second hand from justjap.

I get 30 days warranty and besides that, justjap haven't had one come back faulty in 15yrs after talking to Darron

[Marko R1]

Do u think I can get away with 2 bottles of fluid for a flush (1ltr)?

[Marko R1]

RBF600 is very hard to get but I finally found it, I used just over 1 bottle and the job is done!

Bleeding the calipers was very easy, however, bleeding the ABS was a challenge with the bubbles in the front nipple, rear nipple on ABS was easy though.

I followed the sequence as per workshop manual as I used to always apply pressure THEN release the nipple...with the GTR it's not necessary and in fact can be done with 1 person. You simply hold the peddle down for 3 sec then release and repeat this step until no more bubbles.