Jump to content
SAU Community

Recommended Posts

Hey guys i have installed a plazmaman intake onto my R33 Rb25det and it make a noise. thought it was leaking so i used 3 type of gaskets, Stock rubber, Plazmaman gasket and the cosmetic one but its still the same :(

When i put my hand on the intake plenum the noise goes away.

here is a video of what i mean any one who has a plazmaman intake on their Rb25det can you please help me out, or is it meant to be like that.

https://www.youtube.com/watch?v=6vq77Wi3MTI

Link to comment
https://www.sau.com.au/forums/topic/442530-plazmaman-intake-problem/
Share on other sites

Vid didnt work for me...

If you think you have a leak do something to check if you have a leak!

Either pressure test or as it would be a vacuum leak spray some carb cleaner or similar and listen for rev change.

  • Like 1

sounds like an air leak to me... i dont remember mine sucking so loud. i could be wrong.

the gasket between the bottom and top of the intake manifold is a bitch sometimes, the rubber gaskets dont work too well on the plazmamans... try a pressure test just to be sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes...but look at the numbers. There is a tiny tiny fraction of the number of Joules available, compared to what is used/needed. Just because things are "possible" doesn't make them meaningful.
    • Thanks for taking the time to post that ! If anything changes or happens please do update us. 
    • Somehow Vertimass/Oak Ridge National Labs has figured out a catalyst that can convert ethanol into C9-C10 hydrocarbons in basically a single step without ending up with a bunch of ethylene or similar waste products: https://patents.google.com/patent/WO2023224867A1/en I still don't think anything like this will keep us from needing to transition to EVs regardless along with all kinds of other electrification, but things like this will go a long way towards alleviating the problem of how to electrify things like planes. Renewable diesel is seemingly an easier problem as well, Chevron is already running refineries for the stuff and the primary feedstock is tallow and other waste fats from agriculture.
    • Ok so I have sorted everything with my uniclutch and  i can offer up a bit of feedback and some things that might help others.    I found problems with factory damper line. Weird shit and had trouble with peddle adjustment    I used this https://au.gktech.com/products/r33-gts-t-skyline-braided-clutch-line?_pos=2&_sid=22b01b9b9&_ss=r Also when adjusting peddle leave a bit of play. You can get into a over stroke condition easy.. Make sure you can push the slave forward after adjusting to confirm fluid can return to master then you will need to pump it up heaps…..not sure why but that’s how it is.    last thing the splined adapter is machined perfectly. If your input shaft is old like mine was I would put a bit of valve grinding paste on it and stroke it like a 15 year old. Just to give it a tad more clearance and to better match it to the spline.    reason is on a near flat shift I have had situation where the peddle returns a millisecond after you lift from the clutch. No slip or anything but I reckon this is due to tolerance on the spline being way tighter than stock clutch and binding for a sec. I think this will go away but also my spline was old. Box is old so I guess I should have checked better. It’s a super neat fit.    it feels light as and holds awesome without any noise    
    • My Fuga Hybrid is JDM, 2014 model but very similar to the V37 from the looks of things..same platform just physically larger and very comfortab;e
×
×
  • Create New...