Jump to content
SAU Community

Recommended Posts

I am about to send my Stagea to have the mods tuned .

I have heard it is a pain to tune auto`s ! , but have also heard that some tuners can LOCK the autobox in 3rd for tuning !! ??

Is this possible or an old wifes tale

Link to comment
https://www.sau.com.au/forums/topic/442621-running-auto-box-on-a-rolling-road/
Share on other sites

I am about to send my Stagea to have the mods tuned .

I have heard it is a pain to tune auto`s ! , but have also heard that some tuners can LOCK the autobox in 3rd for tuning !! ??

Is this possible or an old wifes tale

No if you try to tune in 3rd it can kick down suddenly.

Select 2nd - that cuts out 3rd and 4th.

Turn on the "snow" switch - that cuts out first.

Now you can tune in 2nd.

BTW is it a 4wd rolling road? If not you need to remove the front driveshaft or your transfer case can suffer damage. Pulling the AWD fuse only works on the R32GTR not on a Stagea.

What did you end up using for an ecu or are they going to provide and fit something?

Thanks for the info - very useful

Unfortunately in the UK IT SEEMS ( disclaimer ! )

Tuners are more snobby about what they tune and what they tune with !

EG ....

We only tune GTR35`s

We don`t tune Auto`s

WE don`t Tune that system

So I have found a tuner that will roll my AWD Auto - I have brought a HKS F-con iS -

because HE can tune HKS F-con !

the optional OSC cant be used according to him ,

and he will have to fool the ECU signal to the MAF - he has stated that the usual z32 MAF upgrade cant be used !?

and I have `pig`ed` it in with an R34GTT HKS NP5-8 loom .

Thanks again for the info

HKS F-Con should be able to read the signal from a Z32 AFM ok. The stock AFM can only read enough airflow for about 225kw whereas the Z32 is good for about 350kw. A tuner can work around this up to a point by estimating numbers but if a Z32 AFM is available it should really be used. I guess you are lucky to have found a tuner with the software to tune the F-Con at all! Good luck! (BTW what is an optional OSC?).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
×
×
  • Create New...