Jump to content
SAU Community

R33 Burnout Comp

beltdriven31

By beltdriven31,
in General Maintenance

 Share

Recommended Posts

beltdriven31 Apprentice

beltdriven31

Posted
Posted

Hey guys n gals ...

Recently purchased a series 1 r33 gtst in regional WA off a guy who had attempted to fix it but made an absolute mess if it. Purchased for 2200 not running - spent 1500, running. Lol

So it's unregistered still and there is a burnout comp on Saturday night in the middle of the speedway ring on a brand new concrete pad.

I still haven't fitted the front bar n headlights I purchased and am gunna leave them off. I've got a fresh set of stockies on steelies and have changed the oil and filter. Coolant is good and I don't wanna touch it as it has no air locks and why mess with something what's not broken or f**ked.

Apart from a cannon exhaust the car is completely stock, any tips from any one with burnout comp experience with r33 rb25det.... Oh it's a manual aswell I forgot to mention that.

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/442836-r33-burnout-comp/
Share on other sites
beltdriven31 Apprentice

beltdriven31

Posted
  • Author
Posted

1- totally prepared to kill it, it's just a bit if fun seriously

2- dan ... Yes I agree with you, but like I said it's all just a bit of fun seriously it's where I work in the middle of the pilbra it's not a serious car if mine, drift events are a joy of mine back over east.

3- all I'm really after is any little tips that aren't completly obvious. - adding oil had slipped my mind tho so thank you :)

mad082 Grand Master

mad082

Posted
Posted

You have a high chance of the engine, or at least turbo going bang. I'd put money on the turbo going before the engine, especially if it's the stock turbo. The ceramic wheels on them don't like excessive heat, and in a burnout comp it will get red hot (it will literally be glowing).

But if you're prepared to kill it then why ask for tips? Just go out, keep your right foot to the floor until either the tyres out engine go bang. Just start in second gear to get as much smoke as possible and you're set

ARTZ Grand Master

ARTZ

Posted
Posted

4k just to blow it up doing shitty burnouts in a burnout comp....what a waste...

anyway the stock RB doesn't hold up well to burnouts....

head design means all the oil floods the head and cant drain back quick enough..you starve your bearings in the bottom end and boom....its dead...

As well as that they dont really do a great burnout with stock power anyway and I'd honestly say find something better to do with it...like race or drift..

you want burnouts buy an old JZ soarer or a busted Ls1

533 RYC Proficient

533 RYC

Posted
Posted

Put a decent sized (600CCA) battery in it, if you don't, you might run out of spark, if it lasts that long!!! Wire the A/C thermo fan up to a switch. Hit the switch just before you start the burnout!

Take the bonnet off, & if you can (I know you don't want to do this, but there are plenty of correct bleeding threads on here) remove the thermostat for more flow.

Actually, You should PM buddy.duncanson & his alter ego, budskin1. He is an R33 GTST burnout master! His doesn't overheat, regardless of what his temp gauge says! Ask Superben, He knows the guy too! LOL! (sorry Ben!?!)

jjman Mentor

jjman

Posted
Posted (edited)

if it has the stock dump pipe off the turbo its going to go boom. also likely if it has a stock cat (just because it has a connon doesn't mean the rest of the exhaust was upgraded).


if it has any of this do it a huge favour and get a 3" dump pipe for the even and remove the rest of the exhaust.


Also remove the bonnet and heat shield off the turbo if possible.



if it is running the stock computer you might find she will take it without too much trouble as its a pretty soft 'tune' and has knock and temp protection.


if its a tuned vehicle, particularly nistune (no knock detection/protection), then it is going to get hurt more.



As for in the skid, try not to just have it bouncing off the limiter. 4-6k in second gear is the sweet spot for an Rb25 burnout :yes:




Do take video. everyone loves a skid whether they will admit it or not. And kudos to you for doing it in a legal and responsible place. Go hard mate.


Edited by jjman
  • Like 2
jjman Mentor

jjman

Posted
Posted (edited)

haha, have you or anybody you know actually got a tune to work properly with nistune + knock detection on an r33?

often it is pitched as having the same benefits as a stock ecu + systems but it is one of its many faults and problems...

heat shield off + bonnet off wont cook wiring unless the wiring that is running thru there is loose. I certainly wouldn't recommend it for permanent use + bonnet on.

Edited by jjman
Ben C34 Grand Master

Ben C34

Posted
Posted

Ok. Forgot this is on an r33, which nistune don't directly support.

What does the power fc do about knock? Flash a light?

Seeing as you mentioned it, rather than leave it simply implying there are other issues would you care to explain the other nistune shortcomings? No vct switching when used on a 33 , again not actually using the correct ecu on the car and easily worked around.

Anyway, I want skid vids.

jjman Mentor

jjman

Posted
Posted (edited)

yeah power fc flashes a light. so at least its something. also it logs the knock levels/events from memory :P

have a look on some other threads on the nistune stuff as its a can of worms and a complex issue so don't want to hijack this thread with it. it also of course depends on whether you use a z32 (incompatibility issues) or r32 (no vct etc) ecu for the purpose.

I hope you have some cheap chinese tyres for the skids so they squeal nice n loud n also don't last too long. be nice to get several skidz out of the R33 :)

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 · Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 · Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 · Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...