Jump to content
SAU Community

Recommended Posts

Guys,

Recently flushed the oil and replaced it with this and ever since the engine sound and whilst driving the car, it doesn't seem to be running at optimum performance. It is very strange. Best way I can describe is as though the performance of the car after the oil change is performing like a car that is due for an oil change... .

Anyone able to offer feedback on this ? Am I using the wrong oil ?

Car has got 78kms on the odometer

I use Penrite HPR5 5W40 in mine but it's a VQ37VHR motor. At any rate, I've always used either Penrite or Amsoil depending on the required viscosity on all my vehicles. Never had an issue.

Edited by The Max

I literally changed my Nulon 10W40 to Nulon 5W30 when I serviced my 35 today. Haven't driven it properly yet, but can report back tomorrow night after I have done some km in it tomorrow if you want.

Oil viscosity is critical to camshaft actuation, and changing the grade will mean the ecu needs to re-learn the camshaft PWM input figure for a particular advance target. This should happen eventually over time, or it may need to be done via the Nissan consult software. Probably easier for you to dump the 5w30 and put some 10w40 in there, it should feel a lot better.

You may have also dislodged some burnt oil varnish with the flush, which has partially blocked the little filter in the actuator solenoid.

In a nutshell, run a 5w40/10w40 and stick to it, and change your oil every 5k.

Bloody shitty nissans...I change the oil in my Honda every 10k with factory spec 5-30...i even changed it to 10-40 and 10-30 once......vtec still worked fine yo!!

Isn't VTEC just 2 fixed cam settings and it switches between them? if so, it is a bit different to variable valve timing on the VQ.

anyway, I have run castrol edge 5W-30 in mine since I have owned it, without any issues.

Just changed the oil in my PNM35 (also on 78,000km) to Penrite HPR10, which is now rated at 10W50. Not ideal but I'll see how it goes, it's generally just puttering around town at the moment on shorter trips.

Isn't VTEC just 2 fixed cam settings and it switches between them? if so, it is a bit different to variable valve timing on the VQ.

anyway, I have run castrol edge 5W-30 in mine since I have owned it, without any issues.

f**ked if I know, who cares its a honda...lol...

it does use oil pressure to switch between setting i think though....or something like that :wacko:

  • 5 months later...

Heh, I just changed to a 5W30 (Castrol Edge Titanium, was on special at Supercheap) and haven't noticed any difference, although I should really check the oil level to see if it's using any up.

PS: The VQ35 dipstick still sh!ts me to tears, so damn hard to get out without scraping all the oil off in the first place, and then nigh-on impossible to get back in again. I swear the dispstick is the best (and only good) thing about my POS Commodore.

Edited by Hertz Donut

PS: The VQ35 dipstick still sh!ts me to tears, so damn hard to get out without scraping all the oil off in the first place, and then nigh-on impossible to get back in again. I swear the dispstick is the best (and only good) thing about my POS Commodore.

So why check it? Just dump the 5L in and be happy for 5K.

Funnily enough that's exactly the tactic to which I've resorted. Oil change every 3 months means there should be something left in it, and I got the same amount out as I put in last time I changed it (start of this month) so it seems healthy enough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...