Jump to content
SAU Community

Recommended Posts

Greetings Folks.

I have recently picked up a 1993 R32 sedan with a RB25det Neo conversion that was 99% complete.

I just need a couple of things to finish her off and get it back on the road.

I'm sure this topic has been covered thousands of times, however after extensive use of the search function I still can't come up with a definitive answer.

What accelerator cable will fit the conversion?

I know a R31 will not fit, I've purchased 1 and it is way too long.

The motor has a godspeed front facing plenum and a 80mm aftermarket throttle body.

If there is a link to a thread could someone please provide me with it?

Thanks in advance

Cody

Link to comment
https://www.sau.com.au/forums/topic/443081-r32-sedan-rb25det-neo-conversion/
Share on other sites

This has nothing to do with whether it's a Neo conversion or not. My Neo in my R32 uses the original R32 cable, because the throttle body is in the same place!

did you read my post at all?

it has everything to do with a Neo conversion, as it is a neo conversion in the car.

also congrats to your 32. If you had of actually read my post, you would see that I have a front facing plenum installed. Therefore the throttle body is no longer in the same position.

if you want to be a keyboard warrior mate, I suggest you go jump on boostcruising.

Lol.

How does the fact it's a neo matter?

It's the different plenum that has caused your cable issue. Not the neo.

I concur this has nothing to do with neo conversion and everything to do with forward facing plenum conversion.

All the best figuring out your terribly difficult and confusing issue.

I did help.

?

Don't confuse the neo conversion with the ffp conversion.

Search what cable people use with a ffp.

Or better yet ditch the ffp and run the stock one. Then cable issues sorted.

Edited by superben

This is relevant to my interests. I presumed the standard cable would be long enough to reach. Any info on this appreciated.

Just measure up how long you need go down to pick-a part (some auto wrecker) and find one that approximates.

I've done a neo conversion with R32 rb20det computer, what else needs to be done that you haven't got to yet?

You will need either an ECU that can control the VCT or a window switch to do so, the ignitors and the CAS also won't plug into the stock loom, or have you transplanted an R34 loom?

And just cause i was being helpful i looked up the maxima i got mine from and it was a 95-99 model, was exactl same fittings as an r33 but longer

For future peoples that search for this...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Got the gearbox in and the front drive shafts.
    • Hi There I went through a rabbit hole of reading about Xenon headlights and the ADR regulations for having them installed. As people have been defected by running factory xenon I was researching in ways to make them compliant. Everyone always say needs to be self leveling and have washer installed, which I don't necessarily agree with. For this argument I'm using R34 as reference as I'm more aware on the construction of the headlight compared to the R33 Xenon, which may still be the exact same case.   For the self leveling clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles As you can see the bold text "these manually adjustable devices from driver seats" are fine to use. As Series 1 Xenon model headlights do have a 4 level adjuster on the right near the ignition (however not series 2) then these model are consider compliant in that argument.   For the Self Cleaning aspect of this argument clause taken from ADR 13 - Installation of Lighting and Light Signalling Devices on other than L-Group Vehicles Now i can understand the argument that Xenon will need a washer as they are over 2000 lumens, but I clicked on the 12 at the end of that sentence and it takes me to the end notes which states R34 for headlight lenses are plastic, not sure if PL is mark as I don't currently have my skyline to confirm that marking is there. But could you not technically get a lenses with the PL marking on it and then get away with the argument that you need a washer. I went through a quick read of the adr and might have missed something else that may cause them to be non-complaint.    But wouldn't these technically be complaint headlights   Would love to hear other people input on this and shed some light   Edit In regard to the the washer portion I might be mistaken ADR 45 (which I believe is Regulation NO.45) states 12 cd (candela) I dont understand that portion in regarding to calculating the candela if anyone can shed some light. Otherwise I guess throw in a washer for the headlight and you definitely comply.
    • Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
×
×
  • Create New...