Parting Out R33 Gtr Drift Car. Brisbane

[Buckna]

So due to some personal shit,

RB30/25 long engine. Approx 3000km since finished run in.
Nitto H beam rods with built in oil squirters
JE pistons 20 thou over
JUN oil pump
checked and balanced crank, nitto crank collar fitted
Nitto 1.2mm drag head gasket
Tomei oil restrictors
RB25 cylinder head, full recondition VCT blocked off
Kelford 272in272ex 9.35mm lift camshafts
Performance Springs 10mm lift valve springs
Lightly ported intake ports.
HKS cam gears
RB25 power steering pump.
twin -12 block breathers
RB26 rocker covers, with nitto clear front cover, painted pink with 34GTR centre plate and twin -12 outlets
Nitto -10 rear head drain and braided line into block
water ports bunged up with NPT fittings
alternator and thermostat housing included. No manifolds.
Made 522rwkw at 26psi e85
$7500

Greddy intake plenum genuine, with all bolts, Q45 throttle body. perfect condition.
$900

6 boost steam pipe manifold, suit RB25 head. t4 split pulse flange. Borg Warner SX366 turbo, 45mm Vband gate, manifold has EGT sensor ports, as does turbo rear housing (can buy blank offs if not required) 3.5 dump pipe to suit, screamer pipe to suit, -10 turbo drain and fittings. -4 turbo feed and lines.
$2000

Stainless steel 3.5" catback exhaust. slip jointed rear. to single 4" tip. good condition.
$400

HKS fuel rail, -6 twin entry, single -6 exit. speed flow lines to suit. 1650cc bosch injectors, all flow tested perfect. all O-Rings to suit. will suit RB26 and RB25 with suitable mounts.
$900

Splitfire coil packs suit R34 Neo (fitted to S2 R33 atm) less than 500km old.
$450

HKS oil cooler kit. black braided lines, purple HKS fittings, HKS core, HKS thermostat adaptor for SR20/RB25/RB26
$500

KOYORAD N Flow radiator, suit R33, bung in top port for 1/8NPT water temp adaptor. only ever run with redline water wetter. good condition, no leaks etc. HKS radiator cap
$450

Bullion power steering resovior. billet.
$150

Stainless steel overflow tank. $100

Custom alloy catch tank. 4 -12 ports (2 for block, 2 for head) all speed flow to suit (black on black)
$500

Aeromotive fuel regulator. -6 in and out. red colour. 1:1 ratio.
$180

Haltech PS200, custom loom for RB25. 5 bar map sensor, intake air temp sensor, oil temp sensor, oil pressure sensor, stand alone harness with fuse box incorporated.
$2250

Haltech Wideband AFR CAN kit. brand new, used for one track day. all sensors+wiring
$350

Haltech EGT sensor setup. CAN TC4A and TC4B boxes, 6 sensors. all can cables etc
$850

Haltech CAN hub. required for more than 1 can device.
$150

Haltech Racepak Dash, latest version. can cable to suit.
$900

Gforce T101A 4 speed dog box. from nascar. Ratios: 2.69, 1.61, 1.29, 1, LONG side shifter correct setback for nissan trans tunnel, Custom RB bell housing, Custom twinplate clutch from Direct clutch services, Quarter master concentric slave, TH400 output, GM26 input, Strange billet yoke. Will be freshly rebuilt on sale, straight cut gears, dog engagement.
$6500

GTR diff. 4.11 ratio, ATS carbon adjustable 2way centre, GTR drive shafts, GTR hubs to suit. Greddy extended Diff cover. -6 diff breather outlet with speedflow breather line.
$1800

R34 NA rear cradle. bare, non hicas, with subframe risers
$200

Rear drop knuckles. modified for twin calliper (nissan 2 spot callipers)
$350

Ikeya formula Camber, toe and traction arms. Suit S14/S15/R33/R34 (non hicas)
$500

Ikeya formula front lower control arms, suit S14/S15/R33/R34, built in castor arm, roll centre correction etc
$500

Cusco front upper arms, suit R33/R34 adjustable camber, pillow ball design.
$200

GP sports Gmaster coilovers. Suit R33/R34na perfect condition, no leaks/knocks
$1200

mitchy knuckles, R32/R33/R34
$250

Ikeya formula adjustable tierods, new nissan tie rod ends.
$200

R32 cross member with rack moved forward.
$150

Work VS KF wheels. 18x10 -4 chrome on chrome. new Kumho KU39 245/35 tires R disk (clear big brakes)
$1500

Work VS KF wheels. 19x11 +20 chrome on chrome. new 265/30 rotalla tires. 0 disk (maximum dish)
$1500

Work VS KF wheels. 19x10.5 +14 chrome on chrome. new 265/30 rotalla tires. 0 disk (maximum dish)
$1200

Work VS KF wheels. 19x10.5 +14 chrome on chrome. new 265/30 rotalla tires. 0 disk (maximum dish) require some polishing to get up to shine again.
$1000

R32 GTR brake set. rebuilt front callipers, Endless front and rear pads. 4x rear callipers (for dual calliper) DBA rear rotors.
$1000

Wilwood twin pedal box, reverse mount, with 3x master cylinders and braided brake lines from box to callipers
$500

Stewart wilkins hydro handbrake, upright model, wilwood master cylinder with resovior.
$300

Aeroflow surge tank, twin 044 pumps, all mounts and lines to suit.
$500

Nardi deep corn, black centre, perforated leather, red stitching.
$250

Bride Vios 3 lowmax, perfect condition, no rips or tears. genuine, comfy
$450

Bride seat rail, drivers side, side mount.
$250

R33 Ganador Mirrors, painted silver, electric
$350

R33 series 2 carbon bonnet, painted silver. MASA custom, hard to find.
$500

R33 series 2 headlights. not yellowed and shit. good condition, have HID kit.
$350 pair

R33 GTR series 3 front bumper, lip has some damage, bar has indicators and mesh, carbon cannards N1 vents.
$500

R33 GTR boot lid with wing. good condition, no damage.
$300

Beat up R33 PS Duce body kit. Sideskirts and rear bumper only, most pieces there to repair. genuine kit.
$350

R33 URAS sides and rear, previously repaired, painted silver, good condition.
$300

R33 roof spoiler, painted silver.
$200

Series 3 GTR bodyshell, compliance tags, modplated for Engine, gearbox, cage, seats, harnesses, fuel setup, etc. No outstanding defects, currently unregistered, full weld in cromoly cage. side intrusions, through the dash, race car rewire, all glass, working window motors, tinted rear windows, Modified to suit 2wd front crossmember. front tubbed for extra lock. Boot floor cut out for fuel cell. Tunnel modified for big gearbox.
$1200


VE SS commodore coilovers. XYZ brand. good condition. (ute if it makes any difference?)
$1000

VE SS hubs modified to suit 5x114.3 stud pattern. come with brakes to suit.
$1000

Contact VIA SMS only on 0427282562.

All parts located in brisbane. Can arrange postage at buyers expense.

[colourclassic]

What paint code are the Ganadors? KR4?

[Shazz]

Pm sent

[Buckna]

Paint code is Nissan KV8, slightly brighter than KL0

[BLITZ-26]

Keen on haltech can hub and nardi can you pm me pics ?

[eXquiSit]

buckna im still awaiting the gtr shafts, diff housing, half shafts, etc.

can you please let me know when you can supply this to me as i have waited 5 years already...

[Adz2332]

Aeroflow surge tank, twin 044 pumps, all mounts and lines to suit.
$500

can u plz pm me some pics mate?

[NXTIME]

Sent you an SMS as per your first post regarding a couple of things within 40 minutes of your fist post and no reply yet?

[Godzilla33]

Same as above....

[Turbsxr6]

Can u pm me best price haltech get setup can hub n wideband kit please

[Finnie73]

Can you send a pic of the boot lid and wing and coil packs to 0405006900 Cheers Neil

[Adz2332]

never got a reply