Jump to content
SAU Community

V35 Headlight Modifications

SNEEZYC34
 Share

Recommended Posts

SNEEZYC34 Community Regular

SNEEZYC34

Posted
Posted

Hey guys

Im looking at taking my wife's v35 head lights apart and painting the insides back and polishing up the lenses.

I have never done this before so any help would be great.

I plan on starting it on Friday night and finishing it by Sunday night as this is her daily car.

Does anyone have any suggestions with method? paint? what not to paint etc?

Any help would be much appreciated

Thanks

Kris

Link to comment
https://www.sau.com.au/forums/topic/443329-v35-headlight-modifications/
Share on other sites
Superpoo Enthusiast

Superpoo

Posted
Posted

I finished mine a few months ago, split the headlights painted surrounds and resealed. Fairly simple stuff, the mistake I made - and it was a huge mistake - was to try and clear coat the lights for more protection/shine. I'd watched some youtube videos of people clear coating with great success, apparently they wern't using acrylic. When I sprayed the lights they looked good for a few minits then they literaly melted! The fist milimeter or two of the light surface crazed like a turtle shell. I ended up sanding from 300 up to 2000 to get a clear lense again - literaly days of sanding and polishing.

Anyway, the process is all over the net, take out the screws (about 3 or 4 from memory), bang em in the oven and pry them appart (google the temps). The lights are made up of lots of pieces, so painting them is easy. If you want to get rid of the orange indicator you need to cut it out, I just wanted my lights back together at this stage. A full weekend is just enough time to do it right. I used auto paint for the satin black - no clear coat. I wouldn't try and polish the inside, it has some tight corners that would be virtualy impossible to do right.

IMG_1947_zps0c40b1f5.jpg

IMG_1946_zps40986c2c.jpg

IMG_1949_zps2e28ca57.jpg

SNEEZYC34 Community Regular

SNEEZYC34

Posted
  • Author
Posted

cheers for the reply bud,

whats your lights like at night??? i see you painted most of the light black, looks great but i was worried about the lights not being bright enough coz they cant "reflect as much?

Superpoo Enthusiast

Superpoo

Posted
Posted

The reflector is separate, painting the surround doesn't effect the light output. If you look at the surround you will see that there is no surface that helps light output, they are just for looks. There is a separate section to the high beam light that is under the low beam tube (hard to explain) I didn't paint that. The early lights don't even have that part.

SNEEZYC34 Community Regular

SNEEZYC34

Posted
  • Author
Posted

So, im gonna start taking the lights out tonight.

anyone have any suggestions on best way????

i knoe front bar has to come off, which is gonna be fun but anything else we should remove to amke it easier???

i ahve also tried googling the temperature we should use to take lights apart in oven but can see to find anyhing consistant

Superpoo Enthusiast

Superpoo

Posted
Posted

There are 4 bolts and wiring holding in the lights (also indicators in bar), once you drop the bar you will see them, one in the engine bay at the top, one in the side, 2 at the front.

Can be done by undoing the top and sides of the bar and pulling it forward, very high chance of scratching the paint unless you tape the sides... even then?

SNEEZYC34 Community Regular

SNEEZYC34

Posted
  • Author
Posted

So, after a loooooong weekend the lights are finally done.

Took a lot longr than what i thought, being old lights the insides had a few cracks on them, i tried to repair them but just didnt look right, so cleaned them up and tarted again, ypu cant really see the cracks anyway once the lights back together.

Faitly simple process, but polishing the clear lenses took the longest, there was a film on the inside of one and it took about 4 hours to clean off.

Heres a few pics of how they turned out, will post a pic of them on the car soon once i have chance to take a better picc in the day time.

When prying them apart though i lost some of the glue, i had some sikiflex that i used to put on her roof spoiler so i used some of that. seems to be good s its been raining since sunday and no water in lights so very happy

post-107907-0-03098200-1401318194_thumb.jpg

post-107907-0-45228700-1401318197_thumb.jpg

post-107907-0-77762100-1401318199_thumb.jpg

post-107907-0-77222600-1401318201_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      No not yet.  Hopefully this weekend if I can pluck up the confidence!  I had to sit in the car at one point yesterday to unbolt the rear struts.  As mentioned in an earlier post when I was putting it together there is still a bit of rotation possible so when I sat in the car, it rotated a little bit.  I near shit myself thinking the whole thing was coming down!  I do 99% of my own shit in the shed but I think I might call on some assistance the first time I spin it!
    • GTSBoy
      2004 Subaru Forester X Under Cover craziness!

      By GTSBoy · Posted

      Strong first post. On a Skyline-centric forum. Have you considered actually going out into the world, visiting the actual dealership, and asking the parts guy over the counter? Or at least just call them up on the phone?
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      Should shit that in as for the driver ability probably not
    • Apache23
      2004 Subaru Forester X Under Cover craziness!

      By Apache23 · Posted

      Trying to find the plastic under cover for an 04' Forester X. The main under cover that covers most of the front of the vehicle under the engine. This has turned out to be a crazy experience. Normally I can find parts for vehicles, if I have the correct info, no problem. But not this! The Forester is a non-turbo btw. In a Forester parts catalog, for model years 03'-06', it shows part# 56410SA070 as being the correct part. So I go to the local Subaru dealership's website to order it. I type in the part#, hit search and there it is, the under cover. "DOES THIS PART FIT YOUR VEHICLE?" I type in my VIN# and sure enough, "This Part Does Not Fit Your Vehicle. See Similar Parts For Your Vehicle." I click on that and part# 56410SA000 comes up. Looks absolutely nothing like the previous part. Not even close. So I go to a different Subaru dealer website and put in that 2nd part# (56410SA000) and "This Part Has Been Replaced By" 56410SA070, which is the first part I looked up. I thought OK, makes sense. They replaced the strange looking part, with the one I looked up first, so I add it to the cart. "Does This Part Fit Your Vehicle?" I type in my VIN#, and sure enough, "This Part Does Not Fit Your Vehicle." I've basically been doing this with various parts suppliers and dealerships, for the past 4 hours! Does anyone know what the hell is going on?? Thanks in advance!   
    • Looney_Head
      Shoota's R33 GT-R RB30/26

      By Looney_Head · Posted

      have you rotated the car yet? if so how smooth was it?
×
×
  • Create New...