Jump to content
SAU Community

Recommended Posts

Hi all,

New Stagea owner from New Zealand here.

Loving my 2004 M35 250RX, had it for a week now, still getting used to all the bells and whistles.

I'm trying to get an AUX hooked up for music, I have had a look through the forums here and while there is alot of information regarding plugging in other devices to the TV tuner, I can't find anything on simply getting a 3.5mm AUX hooked into it.

AFAIK, this would be accessed though the ATR option on the OEM TV? any help on the matter would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/443390-question-from-a-new-stagea-owner/
Share on other sites

Yup, you can setup an Aux cord including video for the TV to run, I'm currently using an iPod classic for all my music and it just runs though the TV tuner. Wiring take a little bi of running bu its worth it. I leave my Radio on Aux most of the time, or if you have the steering wheel controls, just press mode until it goes to aux (this is the easiest way I've found).

Take a look at this topic:

http://www.skylinesaustralia.com/forums/topic/203961-stagea-series-2-m35-digital-tv-upgrade/page-10

And you'll see the plug about 2 posts down to use. You can either make one of these (I think in that topic it tells you how), you can order one, or, if you are lucky enough, you might find a wrecked stagea with one of the looms. Simply plug it into the tv tuner (located in the passenger side of the boot, you need to remove the side pocket) and then route it to wherever you wish (mine is in my centre console)

Hope this helps

Yup, you can setup an Aux cord including video for the TV to run, I'm currently using an iPod classic for all my music and it just runs though the TV tuner. Wiring take a little bi of running bu its worth it. I leave my Radio on Aux most of the time, or if you have the steering wheel controls, just press mode until it goes to aux (this is the easiest way I've found).

Take a look at this topic:

http://www.skylinesaustralia.com/forums/topic/203961-stagea-series-2-m35-digital-tv-upgrade/page-10

And you'll see the plug about 2 posts down to use. You can either make one of these (I think in that topic it tells you how), you can order one, or, if you are lucky enough, you might find a wrecked stagea with one of the looms. Simply plug it into the tv tuner (located in the passenger side of the boot, you need to remove the side pocket) and then route it to wherever you wish (mine is in my centre console)

Hope this helps

Awesome. cheers mate.

WIll have a crack in the weekend.

Hi Mat, you could also try an fm modulator that plugs inline with aerial plug behind the oem headunit. Thats what i have done with my car. What part of nz are you? I might able to help you with the install.

Hi Mat, you could also try an fm modulator that plugs inline with aerial plug behind the oem headunit. Thats what i have done with my car. What part of nz are you? I might able to help you with the install.

that sounds promising. I'm in Dunedin.

If you end up making it, its nice and easy, plus you can route the cables anywhere you like. I ended up placing a nice set into the side of the centre console (kind of like the wall mounted ones, or like wha you see out the back of a stero, but inside the centre console, if you get what i mean?) Was pretty easy, only required 3 small holes and a bit of solder for the wires, lookes nice and tidy, and is out of the way of prying eyes.

If you were anywhere near Tauranga I'd give you a hand.

If you end up making it, its nice and easy, plus you can route the cables anywhere you like. I ended up placing a nice set into the side of the centre console (kind of like the wall mounted ones, or like wha you see out the back of a stero, but inside the centre console, if you get what i mean?) Was pretty easy, only required 3 small holes and a bit of solder for the wires, lookes nice and tidy, and is out of the way of prying eyes.

If you were anywhere near Tauranga I'd give you a hand.

Way down in Dunedin unfortunately, but you could tell me, do I need the whole handbrake bypass just to access audio when in the aux mode on the OEM tuner? also which pin on the plug at the back of the tuner do I hook into to access just the audio?

was thinking of doing something in the centre console as well (lots of space in there, out of the way).

I'll take a photo of mine, show you how the aux pins came out.

Na, if you have the TV in aux, you only need the handbrake bypass to access video. But if you're driving you don't really need the bypass anyways, unless you put in a reverse cam. But the audio still plays wen moving.

For the Audio, the pins are stated in this topic:

http://www.skylinesaustralia.com/forums/topic/347479-fitting-an-asuka-tv-tuner-in-a-m35/

The first post is great, it tells you how to wire up a lead of your own, and which pinouts are which in a nice diagram. If you are making your own lead, my suggestion is put the video in at the same time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...