Jump to content
SAU Community

Recommended Posts

Hi Guys,

I just wondering if there any clearer picture of their Double din setup that has the 2 din, A/C controller, and stock boost gauge. I seen that it cuts out the bottom bit and install the A/C controller on the cup holder or blank section. I just need a clearer picture if possible.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/443415-c34-double-din/
Share on other sites

Take out the DIN rack and see for yourself. The drink holders can be removed, but its not a standard DIN slot, so you will have to do some custom brackets if the rack for the drink holder doesn't match. I thought about doing it years ago, but it wasn't worth the hassle.

Link to comment
https://www.sau.com.au/forums/topic/443415-c34-double-din/#findComment-7289721
Share on other sites

On second observation, the 2nd picture in the middle showing what looks like the dash hasn't been cut off? Hmmm so confusing lol. Maybe really have to open up and see how can custom fit it nicely, without being looks like "R2D2" into dash.

Link to comment
https://www.sau.com.au/forums/topic/443415-c34-double-din/#findComment-7292403
Share on other sites

By the looks of it the middle photo, shows that you're able to fit it without cutting the din's surrounding and it'll still fit.

You can see how there's a much greater gap between the little storage beneath it and the A/c control. Whether as the other two, they cut the din's surrounding making it a complete 4 din slot.

Am I making sense?

Pretty much, you can cut the din's surrounding/facia or leave it.

Link to comment
https://www.sau.com.au/forums/topic/443415-c34-double-din/#findComment-7292407
Share on other sites

I've been thinking about doing this for a while now too.. really like rhe gauges where they are (dont like sticking them all over the column and wherever else) but want a double din stereo.. following thread with much interest

Link to comment
https://www.sau.com.au/forums/topic/443415-c34-double-din/#findComment-7292805
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...