Stagea Rs4 Series 1 Controller Wiring Help

[hot_c210]

Hi all,

looking for a little help, i scored a second hand AVC-R and RSM from my R32 and i went to install today...

The car im installing into is a 1997 Stagea RS4 auto (S1)

I found all the wiring manuals and setup instructions beforehand

First Problem: so i wired up half of the loom and plugged the controllers in and they powered up instantly, without ignition...

Second Problem: the ECU pinout for the AVC-R and RSM shows a pin that isnt used... the speed senser

Third Problem: the Revs shown on the tacho in the car is about 1040 rpm and the RSM and AVC-R show over 3200 RPM...

First general question: i have a green wire that is tapped into an ECU wire that crosses under the dashboard to the right drivers kick panel...

Second question: the HKS FCD, would someone have the pinout for the ecu to wire that in... Pictures if at all possible..

I double checked all pins but im just not sure, if someone out there has installed one before would you be able to point me in the right direction.

also i did reset both controllers and it made no difference

Cheers in advance

[KiwiRS4T]

Why are you installing a FCD and what do you hope to achieve with it?

[hot_c210]

looking to up the boost to 9psi and the computer has a fit at anything over 7psi