Jump to content
SAU Community

Recommended Posts

i have 93 series 1 and want to know can the series 2 front bumper just bolt on ? this would help due to my front mount inter cooler dosent let my fog/indicators to fit in the bumper properly.and i see the series 2 is more designed for front mount

Link to comment
https://www.sau.com.au/forums/topic/443556-r33-front-ends/
Share on other sites

short answer... No.

You need to change the front reinforcement. And even after doing that the car will look out of place if you don't do the other series 2 parts because the bumper will sit 5-10mm further in than the series 1 headlights. To do it properly you also need

Bonnet + latch
Front Guards
Headlights
Grille

I think your better off buying a Series 1.5 bar or its also called a series 1 M-spec bar

Link to comment
https://www.sau.com.au/forums/topic/443556-r33-front-ends/#findComment-7292594
Share on other sites

You dont need to swap guards for headlights im pretty sure. S2 headlights bolt straight in and flush with S1 guards. you'll everything else he has mentioned though.

Ive done the S2 conversion on my NA any questions just ask. easy as piss. also youll need to cut and rewire the wires for the fog lights/indicators as there different plugs. well on my 93 they were different to the S2 wiring loom plug. so i cut and"crimped" :S works perfect though.

at first i only did bumper and reinforcement bar. from a distance it looks completely fine. but the headlights do stick over the bar a little.

Link to comment
https://www.sau.com.au/forums/topic/443556-r33-front-ends/#findComment-7299502
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 馃槈. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 馃槏.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
  • Create New...