Jump to content
SAU Community

Recommended Posts

Hi all,

I'm looking at getting the quietest exhaust possible while still managing around 200rwkw or slightly over.

Every exhaust I have seen on 33's is to loud (over 87db).

As my 33 is my daily I want to keep it as quiet as possible while still gaining some benefit from having an aftermarket Dump/front pipe and a highflow cat.

I was thinking of just leaving the stock cat back portion of the exhaust but with an after market dump and highflow cat.

Would this still be highly restrictive?

My understanding is that the most restriction on these systems is the dump and cat but not so much the rest of the system.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/443635-stock-cat-back-power-limit-r33-gtst/
Share on other sites

I agree with nizmo_man. You can have a decent flowing exhaust that isn't over the top loud by using proper mufflers.

This idea that unless it's a 3.5" straight through with a decat means it won't flow for shit is complete bullshit. You can have a 3inch exhaust from the dump to tailpipe with decent mid and rear mufflers (no cannons) and still perform well while being quiet.

I guess what you percieve to be quiet is down to personal preference. Also the stock catback is the cheapest option if that suits you; just wanted to throw in the idea that you can have a decent performing system without it being obnoxiously loud.

Having said that it would be pretty hard to pass the EPA noise test with anything bigger than the stock system I imagine, hopefully someone can weigh in here

I guess I just don't want to spend mega bucks on a system if the stock cat back system is still good enough with an aftermarket dump/cat combo. If I was chasing 300rwkw or something then fair enough, but I think I'll be staying with the stock turbo for awhile.

I think you're missing the point. There is no "power limit" for the stock cat-back. You can flow any amount of "power's" worth of exhaust through it you like. It's just that as you get up into bigger flows it starts to put up more of a fight and the backpressure mounts. At some point you would be silly to continue winding up the boost and doing whatever other mods to the engine to make it able to push that extra gas through the exhaust. But long before that point you would be well advised to upgrade the exhaust to something larger because it is basically free power and free boost response (compared to bigger turbos and all the other stuff you can buy to strap on to the engine). A good exhaust is not that expensive and will immediately allow the engine to make more power and boost faster even with nothing else changed. To ask if it is "good enough" for 200rwkW ignores the fact that if you leave it on and try to make 200rwkW you will need more boost and use more fuel, possibly run closer to detonation, need more conservative timing, etc, than if you were to put a bigger exhaust on it.

In reality, the correct order of modification for a turbo engine is almost always exhaust first, everything else second.

^ That's very true.

I wasn't arguing what's better or what was achievable, I know the stock system is restrictive and not ideal, but for all I know the stock cat back portion flows ok for a stock system and could be fine for the stock turbo boosted etc.

I'll keep an eye out for a decent second hand system, something without a canon.

Cat back exhast only will make it hard to get around 200kw mark, I have a full 3" turbo back xforce system on mine and noise when cruising is no problem at all even with the added drone of having a wagon.

Definitely keep an eye out for a 2nd hand system and just make sure the mufflers are in good nick so you can minimize noise but still have no problems with restriction in the exhaust.

As others said rather than screwing around trying to fine tune everything with various mods just go exhaust first to have good starting point to see what mods you need rather than going all out on a restricted exhaust.

Sorry for the essay and any typos which I am prone to with lack of proof reading

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • Do you have any before and after photos? That's $200 just for the hydro blasting?
    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...