Jump to content
SAU Community

Cas (Cam Angle Sensor) Help!

theDETlife

By theDETlife,
in General Maintenance

 Share

Recommended Posts

theDETlife Contributor

theDETlife

Posted
Posted

Hi everyone, first time posting on this forum so take it easy.



Without thinking i've removed the cam angle sensor of my neo without making any marks. And making it worse i've turned the engine over a few times with the sensor off.



I was just wondering how serious this situation is? the pin/input shaft that going into the end of the cam shaft looks like it can only go in two ways. So is it a 50/50 change that it will go in the position that it was previously in before i took it out? or will it be 180 degrees out of its original position and will send the wrong signal to the ecu.



how noticeable will the effects be if it were to be in the wrong position. will the fix be as easy as rotation the pin/shaft 180 degrees?



Any help appreciated



Thanks. :yes::cheers:


Link to comment
https://www.sau.com.au/forums/topic/443811-cas-cam-angle-sensor-help/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted

The CAS can only go in one way - if the half-moon key is still in the end of the ex cam. Then centre the CAS mounting bolts. The engine should start, and once its up to operating temp you can reset the base timing with a timing light.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      You ask for things. You specifically state you want responsiveness. A link was provided for a far superior, more responsive option. Find a MX5 workshop that will install it for you. Maybe MX5 Mania will throw on the Fab9 kit. It seems they want to charge almost 14K installed for their kit, so if they charge you $6K to install the FAB9 kit then you'll be ahead? Though really, the 2.5 with a 2860 running low boost will more or less feel as good as anything else. It's a lot of displacement and a small turbo. Think of a more modern RB26 with one stock turbo :p TBH, truth be told I've been driving my own car, and use about 50% throttle at most for 99.9% of the time. Mr Bogan is likely similar so this is all going to be semantics for the use case he actually has. (He'll be happy with anything relative to now) However, the EFR is hands down far superior in this use case. You really, really, really, really do notice it over the Garrett or equivalent.  
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      You are correct, the earlier the torque, the earlier things snap
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Gents, it will be getting the MX5 Mania kit and the 2.5 will be staying where it is My query was about the 0.64 or the 0.86, whilst the 0.64 might spool a bit faster, would the 0.86 be better IRT EGT and mechanical sympathy, with only a small difference in spool And as I assume I won't need alot of boost to get to 200kw, probably around 10 psi, and with max rpm at 6500, would high EGT even really be a issue with a 0.64 I'm heading into MX5 Mania at the end of Jan to discuss the install, so any info is welcome prior to that Basically have a chat and book a time so they can throw on the turbo kit, and fit a oil cooler with a thermostat, drive in drive out of course  In other news: just finished cleaning the car inside and out, it's now all ready to get covered in bugs and dirt driving to Goulburn tomorrow to lunch,  and go for a stroll along woolondilly River with the daughter and her boy, and of course, visit my grandcats and my new grandpuppy 
    • GTSBoy
      HY51 Fuga Hybrid

      By GTSBoy · Posted

      Sounds like it has an actual problem with mode select doors, or something.
    • alburger87
      HY51 Fuga Hybrid

      By alburger87 · Posted

      Hope your all having a mean Xmas! If anyone happens to know any trick to using the insanely complex climate control system, I cannot get it to not be on dual zone no matter how many times I deselect it (will say it's not but both vents blow different temps). Also one side is always hot, one always cold 🤷
×
×
  • Create New...