Rb25Det Replacement Turbo

[Tank240sxt]

I hope that I am posting this in the proper location, if not I apologize ahead of time. So I was looking for a new/different turbo to put on my RB25DET power S14 Left hand drive as I'm in the states. All of this is being done to overcome some issues with the turbo elbow and the currently installed turbo. So I was on eBay and saw the following: www.ebay.com/itm/251078425474?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649. I was wondering if anyone has any experience with this turbo or the company selling it? I think I might just have to go to a shop that can make a turbo elbow to address the issue.

Thanks in advance for helpful responses.

[Badgaz]

Stao from hyper gear turbos is the man to speak to. He is active on this forum.

[Badgaz]

I believe most people use a long 90 degree silicon elbow.

[Tank240sxt]

I believe most people use a long 90 degree silicon elbow.

Thanks for the info. Might you have a pic or a link to the 90 degree silicon elbow.

[GTSBoy]

You could google that in seconds.

[Ben C34]

You could google that in seconds.

Maybe he doesn't have the Internet?

[KiwiRS4T]

I hope that I am posting this in the proper location, if not I apologize ahead of time. So I was looking for a new/different turbo to put on my RB25DET power S14 Left hand drive as I'm in the states. All of this is being done to overcome some issues with the turbo elbow and the currently installed turbo. So I was on eBay and saw the following: www.ebay.com/itm/251078425474?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649. I was wondering if anyone has any experience with this turbo or the company selling it? I think I might just have to go to a shop that can make a turbo elbow to address the issue.

Thanks in advance for helpful responses.

Shouldn't be too expensive to get a shop to weld an elbow on to your compressor - I have one on mine (for different reasons).

[89CAL]

Shouldn't be too expensive to get a shop to weld an elbow on to your compressor - I have one on mine (for different reasons).

Yeah I got the same done to mine to clear the exhaust manifold

[Tank240sxt]

Yeah looks like I found a shop that will modify the elbow that I have so that the steering shaft will not make contact with the exhaust.

[scotty nm35]

Are you talking about the dump pipe I assume?

[Ben C34]

Are you talking about the dump pipe I assume?

I like to call the compressor outlet the elbow,the inlet is the forearm and turbo exhaust outlet the wrist to avoid confusion.

But the turbo exhaust inlet has me f**ked anatomically.

[GTSBoy]

That's a knuckle. HTH.

[Tank240sxt]

Ben C34's description is correct. I search for a while never finding what I was looking for which is why I asked the questions. Sometimes you just can't find what you need so you ask for a little help from the people that should know. Well at least now I know the best thing to do. Thanks for the helpful suggestions.