Jump to content
SAU Community

Recommended Posts

Hey

I've done searches in regards to this, but there are differing opinions and not many proper answers...

I've dumped oil plenty of times. This time though, after letting the oil drain for about an hour, I went ahead and put in fresh oil. But I've accidently overfilled...

It's 4L engine + .4L oil filter on a RB20DET. Engine has done 150k.

I put about 4L in, let it sit, had a look at the dipstick and it showed above H. Went for a small drive, let it sit again, but still sitting about 4mm too high. The dipstick shows the oil level about 4mm above max. and it just touches the letter H.

Should I drain some out?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/443919-rb20det-oil-overfill/
Share on other sites

Nah no dents, sump is all good. A fair bit of oil must have remained even after draining...

I think the best thing to do is simply get it at the correct level.

I'll see if I can drain some without undoing the plug completely, otherwise I'll dump the lot and then put it back in at the appropriate level.

Nah no dents, sump is all good. A fair bit of oil must have remained even after draining...

I think the best thing to do is simply get it at the correct level.

I'll see if I can drain some without undoing the plug completely, otherwise I'll dump the lot and then put it back in at the appropriate level.

Just to recap.

You come on here asking if the oil overfill is ok.

2 people say it is ok.

You somehow decide you should drain it.

Seems odd.

  • Like 1

Just to recap.

You come on here asking if the oil overfill is ok.

2 people say it is ok.

You somehow decide you should drain it.

Seems odd.

I don't know why you'd say that, I get asked for help all the time and it goes roughly like this:

*phone rings*

Me: "Hello"?

Caller: "Hi I need your help with X, it's doing Y"

Me: "I know what the problem is, you need to do Z"

Caller: "I don't think so, I reckon it's.............."

every. single. time.

I think people are just f*cking useless at asking for help.

To weigh in on the original conversation I fill between the H and the hump on an oil change (in an RB25 you can just dump 5L in if you have drained it on a level surface). I assume the hump is the danger zone much like there's a hump on the low side as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
    • 😜 hopefully we get this instead of a new R36 GTR due to recent financial problems at Nissan. Nismo to sell a complete kit with RB26 and driveline. All starts making sense (ok maybe not) once the Nissan Leaf's (Leaves?) with stuffed EV motors/batteries hit the market cheap
    • Hi guys , have had allot of time for SAU and has helped me out heaps in the past so I thought I would give it a go , I have my QM1 white NUR for sale 1 of 156 examples built by Nissan. Serious personal messages please if interested and details will be provided , asking 500k 
×
×
  • Create New...