Jump to content
SAU Community

Shed Cleanout. Rb26 Arias Forged Pistons, Ati Balancer, Coilovers, Semi Slicks.

freestyleMX
 Share

Recommended Posts

freestyleMX Community Regular

freestyleMX

Posted
Posted

RB26 ARIAS Forged pistons.
Used for one dyno session then removed, nothing wrong with them.
86.5mm
8.1 compression

$800

o2fs.jpg

0v69.jpg
j7vza.jpg
8scp.jpg
RB26 ATI Super Damper Balancer #918599
Not much use
$350
vg3o.jpg
35c0.jpg
Pair of R32/S13/R31 REAR ISC base height adjustable N1 Coilovers
No leaks or knocks in good working condition.
$400
ks5f.jpg
5jt6x.jpg
2x 50% Hankook Z221 Semi Slicks in the C70 (soft) Compound 235/45/17 these have been stored correctly out of the sunlight and elements.
These tyres sell for $400 ea RRP
$400 for the pair.
2cyk.jpg
r8bl5.jpg
R32 GTST straight through Turbo back 3'' mild steel exhaust with 5'' tip modified Varex oval muffler and fake cat.
Comes with 3'' dump pipe to suit low mount spaced out turbo needs flange/v band welded on.
In place of the cat, there has been a pipe with the heat shields welded onto it (makes it look like there is a cat there still)
Varex muffler has had a 5'' stainless tip welded onto it comes with control box and hard wired rocker switch.
this system is perfect for a street car, with the varex you can go from being loud, to almost stock sound with the press of a button
$650
nwv35.jpg
3uev.jpg
m3pr.jpg
4brl.jpg
Located in Adelaide S.A (can post everything on here at buyes expense)
freestyleMX Community Regular

freestyleMX

Posted
  • Author
Posted

hey mate do u know the wat kg springs are in those coilovers? would u post to qld? please contact me on 0421314199 thanks john.

hey mate these are 6kg springs, happy to post.

Thanks

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PranK
      Cleaning my wheels 😍

      By PranK · Posted

      A little follow up here on the ceramic coating.  We've had storms galore here and I've done a few ks, enough to gross them up  Consensus is that they didn't get as dirty as usual, the coating definitely repelled a little of the dirt and I think they kinda snowball. They get a little dirty and then they get dirty faster which makes sense. Cleaning them regularly would allow them to protect better.  Cleaning was a breeze. I tried first to just hose them off which, unsurprisingly, did nothing. But, making the wheels wet and then just wiping them over with a used but clean microfibre cloth was all that was required. I didn't need any cleaner at all, just water and a cloth. The wheels look amazing again.
    • PranK
      My BMW 335i

      By PranK · Posted

      Gave her a nice wash today and took extra time to clean off the tree sap and tar and crap. We have a usable garage now so she'll stay cleaner longer. Took a few snaps in some nice light afterwards.   
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      OK, solid mount Z1 diff brace is in, pretty straightforward, it picks up 3 diff hat bolts and ties them to 2 support bolts on the subframe. Pretty sure someone else on here said they had reduced axle tramp with this but mine was already pretty good for smooth wheelspin, and still is....will see you this goes over time and whether I end up with a broken rear diff hat
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes, but the part in my hand was actually painted and fitted by me! I knew any front lip was likely to be sacrificial but I've had to fix it twice already... by the time I buy a fibreglass fixing kit, sort out sandpaper blocks, buy some fibreglass filler, body bog, spend the time and effort for a 'Greg' result... a new one being $290 seems like it's the better way to go and spray that with bedliner/raptor coat and we're all pretty again.. Would have preferred it last more than a month though. Them's the breaks I suppose.
    • MBS206
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By MBS206 · Posted

      I find it funny that the USA is finding out all this really really weird stuff, and people from the USA are coming here treating it like gospel, yet, all the info on solving those issues is here on these forums for the last 15 odd years... Also, I know how much heat it takes to ignite the hood lining of an R33 skyline. I worked it out myself... It also took a LOT of time, and heat for it to do it... Big single, and I needed to drive the car, so retarded the timing off to "protect it". Yeah, that was a bad move for cruising on a freeway with only 15 degrees of timing on it. That was a lesson I learned around 2009. So that's over 15 odd years ago. Aligning water and oil, that's identical for any turbo engine, it's not Japanese specific. If a shop doesn't know how to make sure the core is rotated the right way, then they shouldn't be touching any turbo engine. That's not a matter of "We haven't had Skylines for that long here"...
×
×
  • Create New...