Jump to content
SAU Community

Recommended Posts

While rebuilding the S1 Dayz RS4, I measured the thickness of the core at 25mm. I compared it to the other RS4, the one that has the "gurgles", and was very surprised to see it was only 17mm.. Even the 25G is 25mm.

I now recall that when I was fitting the FFP I broke the top hose connection and bought a replacement radiator off the forum, never noticing the different thickness. Someone flogged me a bodgie rad. My BAD..Buyer beware. When the 25G got front shunted I used the core off the RS4 to get the rad fixed. Hence it being 25mm now. It runs cool as a cucumber.

Just maybe, the reason the 17mm Stag has the gurgles is because the rad is too thin and it boils when pushed?

Next thing is to get a Rad with a 25 plus core.

Link to comment
https://www.sau.com.au/forums/topic/444154-c34-radiator-core-thickness/
Share on other sites

  • 8 months later...

Not only an FMIC but also a tranny cooler. I had thought of putting in an oil cooler but I have a remote oil filter also and it would have been a PITA to fit. The alloy rad fixed all.

Edited by 66yostagea

S1 is quite thin (approx 15mm, same as R33 GTST IIRC)

An aftermarket koyo rad (standard construction, plastic top and bottom tanks) is thicker at about 25mm, but has fewer flutes than the stock rad, as the flutes are wider.

No idea which would flow better, could be a close call (fewer large flutes v's more smaller flutes) but surely additional thickness will improve cooling?

Y31 Cima rad is identical in width/height as the C34/R33 rad, but is double row, so a good upgrade for cheap if you can get one!

Edited by crazy86

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You ask for things. You specifically state you want responsiveness. A link was provided for a far superior, more responsive option. Find a MX5 workshop that will install it for you. Maybe MX5 Mania will throw on the Fab9 kit. It seems they want to charge almost 14K installed for their kit, so if they charge you $6K to install the FAB9 kit then you'll be ahead? Though really, the 2.5 with a 2860 running low boost will more or less feel as good as anything else. It's a lot of displacement and a small turbo. Think of a more modern RB26 with one stock turbo :p TBH, truth be told I've been driving my own car, and use about 50% throttle at most for 99.9% of the time. Mr Bogan is likely similar so this is all going to be semantics for the use case he actually has. (He'll be happy with anything relative to now) However, the EFR is hands down far superior in this use case. You really, really, really, really do notice it over the Garrett or equivalent.  
    • You are correct, the earlier the torque, the earlier things snap
    • Gents, it will be getting the MX5 Mania kit and the 2.5 will be staying where it is My query was about the 0.64 or the 0.86, whilst the 0.64 might spool a bit faster, would the 0.86 be better IRT EGT and mechanical sympathy, with only a small difference in spool And as I assume I won't need alot of boost to get to 200kw, probably around 10 psi, and with max rpm at 6500, would high EGT even really be a issue with a 0.64 I'm heading into MX5 Mania at the end of Jan to discuss the install, so any info is welcome prior to that Basically have a chat and book a time so they can throw on the turbo kit, and fit a oil cooler with a thermostat, drive in drive out of course  In other news: just finished cleaning the car inside and out, it's now all ready to get covered in bugs and dirt driving to Goulburn tomorrow to lunch,  and go for a stroll along woolondilly River with the daughter and her boy, and of course, visit my grandcats and my new grandpuppy 
    • Sounds like it has an actual problem with mode select doors, or something.
    • Hope your all having a mean Xmas! If anyone happens to know any trick to using the insanely complex climate control system, I cannot get it to not be on dual zone no matter how many times I deselect it (will say it's not but both vents blow different temps). Also one side is always hot, one always cold 🤷
×
×
  • Create New...