Jump to content
SAU Community

Recommended Posts

So I've noticed on eBay there's a few greddy 6 throttle body's intake plenum replicas on ebay, now the greddy is around the $1100 mark and the eBay jobs are around $300 to $500 but still boast of decent power gains. Has anyone brought a eBay special and noticed the gains with there rb26? Or had any troubles with them?Or is it best to stay with the original intake?

Link to comment
https://www.sau.com.au/forums/topic/444211-ebay-plenum-for-rb26/
Share on other sites

Who's to say the Ebay one won't also?

Have you checked this theory by measuring the egt's in each runner, or are you just happy to quote old wives tales? Gibson didn't have any trouble with it afaik...

I'm just asking questions to find out if it's worth while or not. I'm no mechanic and trying to find these things out on google is hard if not to no answer at all. That's why I've tyres to the forum to hopefully find someone that has done this and that may help me out

People do all kinds of stupid things, that doesn't mean you should copy them... :P

I have seen 500kw through a factory setup, intercooler, plenum, manifolds, piping, airbox, fuel lines etc. If you are near that I would be more worried about the block splitting than the runner flow. Just run a fat mixture and cram some more boost in.

Just to help the OP, ive got a genuine Greddy and had a ebay/china copy side by side.

You had to look really hard to spot the differences, runners, diameters, everything identical, slight differences in casting lines...very slight.

Would come down to the quality of the alloy IMHO.

Ive met and spoken with a Chinese manufacturer that makes them, as he said to me with any part, supply me with the brand name original and ill copy it for a fraction of the price and you wont tell the difference.

And just to throw a spanner into the works, he was offering them to me for $US 80 dollars each 2-3 years ago, no wonder there are so many copies out there......

Would come down to the quality of the alloy IMHO.

This... And how it's actually made. You can have the same materials, same design (making a mould isn't hard) and still stuff it up by having the casting temperatures or cooling speed all wrong. End up with a brittle part of the product which will be the first to crack under a high load.

Personally, I wouldn't want anything potentially breaking off a scraggy bit of metal under high temp / pressure and going straight into my engine. So if you go for a cheap copy get it checked out with a scope and cleaned up before it goes near the car.

  • Like 1

I found a few forums searches off google saying that they lean number 6 , thought I'd ask before I finished my motor because it would be easier to change a manifold whilst it's out. I'm thinking I might buy the greddy/trust manifold for peice of mind

Re cylinder 6 - true. Although tuned around.

Stock plenum is awesome and you will have no issues so keep it. Don't waste your money on these for the RB26

In my opinion the best is the Nismo Plenum - max 2-4% improvement - EDITED: 1-2% power and 0.4% fuel saving - SUBJECTIVE. Yes I have one

At $1500-$2000 money is spent better elsewhere.

Topic covered heaps already

Edited by Sinista32
  • Like 1

I'm building my motor ATM to have around 450 to 500kw

I found a few forums searches off google saying that they lean number 6 , thought I'd ask before I finished my motor because it would be easier to change a manifold whilst it's out. I'm thinking I might buy the greddy/trust manifold for peice of mind

I see.

Well I'd double check with Racepace, just give them a call to confirm.

As I have said before, you can get decent power gains with the stock Inlet Plenum but how much to what point, I'd double check.

So yeah, don't go throwing your money on ebay parts.

I noticed your user name and that you had a R32 GTR, so im assuming your doing a RB30 bottom end?

If so, before you go any further, the Greddy plenum will hit your clutch master, there are work arounds, or a few ways to do it but if your only going to 500Kw you may as well stay with the factory item, it does still work well.

Yes 6 can lean out, or run leaner, quick cheap way is get your injectors flow tested and put the highest flowing one on number 6. ;)

Otherwise 6 EGT probes on the manifold will do the trick......as will getting the tuner to run injector 6 a little longer.

Edited by GTRPSI
  • Like 1

Yeah mate I'm halfway through building a 26/30. Can the stock manifold be port match to the head or is it already done from factory? Also is there threads on how to fix the greddy manifold with the clutch master cylinder touching?

There are a few threads, all with different suggestions/methods in the RB30 section.

From using spacers under the cross member to steering shaft spacers to cutting the bonnet, some even remove the clutch booster and use a different clutch slave with spacer.

We are doing the same build right now for our 26/30 R32 GTR.

Edit, Forgot to add, port matching always helps, all depends on how far you are going or are prepared to look at details.

Edited by GTRPSI
  • Like 1

I've had the 30 bottom end in my GTR before but I never went crazy on the head. My n1 pump let go so I'm spending abit more this time. But all I did was cut the inner braces out of the bonnet and tapped the floor up abit with a hammer near the low mount dumps for clearance. Everything else was sweet. Well I've got an aluminium die grinder bit so I better port match it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...