Jump to content
SAU Community

Recommended Posts

Hey guys I have a r34 GTT with a power fc just the stage 1 mods, and suddenly the engine light started flashing at around 5500rpm and is if there is like a boost cut.

I instantly thought it was knock and grabbed the hand controller and it was only like 10.

So I thought it might have been the injectors maxing out for some weird reason but they are at 92%.

Air Meter at 5100, I swapped over the AFM with a spare that I have and it's still doing it.

Next step I disabled the Injector warning - Still flashed.

Disabled the AFM warning - still flashed.

Turned the o2 sensor function off - still flashed.

What the hell could it be I have no idea, please help, thanks.

It depends what the warning is set out. You can set it to go off at whatever you like

The map sensor is for the boost control kit but does work without it. If you bring boost up on the hand controller and its got lines instead of a figure then you don't have the map sensor. I dont think you do but had to ask. I'm not even sure if it flashes the engine light anyway.

  • 2 months later...

Hey guys well it started again arhhh.

Weird although I have noticed that it mainly does it in the rain???

At about 4000 rpm mainly in 2nd engine light flashes car feels like it just turned off and back on then I back off.

I once thought fark it lets see what happens and it hesitates for a few milliseconds then goes fine, I'll attach a photo of my peak hold off my power FC if that helps at all.

I'm thinking either clogged injectors or is my fuel pump getting weak? if you think it's the fuel pump how can I test that?

Thanks for any help in advance.

post-84648-0-75046700-1409140813_thumb.jpg

Your airflow is getting borderline out of range (high)

Your injectors are borderline of reaching maximum

Both may be within the warning set in the Power FC. Depends what the tuner has set them to

Doesn't explain the problem with the drive from the car, but will explain the warning light I'd say. The Tuner may have set them at those levels, without FC-Edit to look at the settings then

If it were me, I'd be getting a Z32 AFM and some bigger injectors, then trying to troubleshoot the problem, because looks like what you have now is not quite enough to do the job safely. It may be a problem with the AFM, and you may find that spending $200-$400 on a Z32 AFM might solve your problem anyway.

Without more information though its hard to say for sure. It may be worth talking to your tuner about it so he can see the car and experience the problem

Yeah true, what trips me out though is that the car has been tuned like this for the past 2 years and now all of a sudden this is happening, I've tried 2 different AFM and 2 different o2 sensors just incase and same thing is happening, running the same boost and all, well I'm sooning aiming for my stage 2 upgrade, hopefully get near 300rwkw just stuck on which turbo to get, and which injectors, are the r34 injectors side feed or top feed? thanks.

Lose the whole 'stage 1' upgrades, etc.

Tune's dont always stay 100% perfect, in fact most of the time they dont. Differing temperatures for example will make a difference. Colder winter then normal for one

As the engine wears it will probably make a difference as well

It would be better to log data on a laptop and see exactly what the car is doing when the problem occurs. Hence why it would be a good idea to go see your tuner, see what he thinks. Becuase chances are he has seen it before

What you can try do is disable the ECU from giving warnings if your AFM or injectors are at peak. What I would do next is have the control in the mode which lets you view the sensors and if the ECU triggers a warning have a passenger watch the screen closely to see if one of the triggers switches off. If the ECU is throwing an issue, it can be reported by the hand controller, whether it be a threshold limit or a component failure.

Ahh k so put it in the sensors mode correct? And watch for one of the little circles to either come on or off yeah? It's not the light that bothers me I just don't want to blow anything - don't have the time or money for that atm.

It just trips me out as to why it mainly happens when it's raining and why all of a sudden if you get where I'm coming from, and also that little jurk that I get when the engine light does flash and what causes that? I'm thinking maybe as a safety precaution it's like a Rev limiter.

the engine light in my r33 flickers at times when im pushing past the 7,000rpm mainly in 3rd n 4th. Knock doesnt register any higher or go up when the light flashes, no engine damage or failures have happened and i have more than enough fuel and headroom with my setup. I've sort of learnt to ignore it and focus on knock readings

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
    • I have a r34 sedan 1999 manual converted need some help with my speedometer it only reads upto 98km and then stops currently still running the auto cluster any easy fixes no speedo drive is connected yet, if someone has a video for wiring up the manual speedo sensor with the auto cluster please send through 
×
×
  • Create New...