How Much Are Brembo Rotors?

[Cherry Racer]

Hi All

I have an R32 V Spec and have seen the Nismo brake rotors for $250 each (plus shipping).

Does anyone know how much the original Brembo rotors cost?

Thanks

[Sinista32]

$200ish a pair

[Victory]

You can always buy them from Nissan Australia for $3,200 each.

All of the other Nissan rotors are cheap as but as soon as you say GTR and Brembo they hit you big time.

[Sinista32]

Maybe check ebay with keywords like "Brembo, Drilled, R32, Nissan" and see if you can find a set.

$3200? fuarkme I'd go DBA before I went to Nissan

[XKLABA]

eBay DBA R33 GTR discs and so what you get

[scotty nm35]

I never did like Brembo rotors, take the advice Xklaba dished and get DBA 4000's, that's what I did.

[GTRPSI]

The Brembos, the DBA and the RDA rotors are all from ching chong land, if you think the brembos are from Italy, your mistaken, we personally know the person with the Brembo contract for Australia and also know because we sell rotors and pads for a living.

My only advice is stay away from cross drilled rotors which are prone to crack.

Biggest effect on the rotor is the pads you chose.

[Cherry Racer]

Thanks all

For me its more about keeping the car stock. Everything is OEM so im not keen on DBA etc.

Nismo parts I can make an exception for.

[macaroni646]

Why not get unslotted DBA discs then

[niZmO_Man]

OEM rotor: http://www.amayama.com/search/?q=40206-12U00

Yes, that's $1,000+ per rotor lol.

[Victory]

If you use the option to show in AUD it converts to $1,103.88 each plus delivery. Compared to the price that Nissan Australia wanted for the same part that is cheap.

Tell you what - I have multiple sets of front disks for R33 Brembo callipers in my parts shed (spares for my GTR and my track car). Some are new RDA slotted rotors and some are factory Brembo rotors.

The Brembo ones have been machined and are in good condition. I would be prepared to let them go for $1,000 for a pair and I will cop the loss.

[niZmO_Man]

The Brembo ones have been machined and are in good condition. I would be prepared to let them go for $1,000 for a pair and I will cop the loss.

Hahahahaha

OP, get plain rotors from DBA or RDA, you won't notice the difference. Or DBA 4000 for some extra street cred. It'll cost a lot less than $1,000 per rotor.

[mjtown]

What did you end up going for Cherry Racer? I'm looking for rotors and pads for my R32 V-Spec now.

Do you have a link to the Nismo rotors?

Has anyone used Nismo S Spec pads?

[Hadouken]

What's wrong with good old dba rotors?

He probably gone. This thread old.

[GTRPSI]

The Brembo ones have been machined and are in good condition. I would be prepared to let them go for $1,000 for a pair and I will cop the loss.

Hell, id better get some of those Genuine Brembo rotors in from my supplier and start selling them for $800 a pair new, im going to make a absolute killing on them.

[sleeper_gtr]

I second that. Got the dba 4000 and they definitely stop me without any problems. Plus more than half the cost to do all four.

[GTR-N1]

If anyone here in Sydney is after used rotors in good nick with still a couple of mm on them you can have them gratis.

* They're off my BNR32 V-Spec II with Brembos

* They've been replaced with dba that came my way through good fortune

[niZmO_Man]

I might have to grab the rears if you have them Terry.

[GTR-N1]

Pleasure Ravi.