Jump to content
SAU Community

Recommended Posts

Hi guys,

Im interested in buying a skyline, its gotta be a r34 gtt manual coupe, perfer white...

Im concerned about a few things,

First, the chassis badge was embossed and silver not the blue one that its suppose to have

I have painted part of the attached image for seller saftey.

This car is listed on carsales, is a white car for 18k in victoria.

This car also has a exaust leak near turbo, you can smell and hear that, plus feels a loss of power sometimes..

Owner did timing belt himself, that also concerns me and noticed replaced cas, and was positioned full left.. dunno whats going on there.

Front of body has previous accident can tell due to lfront lights have a gap on left, not on the right.

Apart from that body is immaculate.

,.....

2nd interested car.

This car had a blue smooth chassis plate..

I feel engine was very well looked after.. smooth as silk when driving and restarting.

tho engine was running when arrived, prewarmed reason was flat battery and not driving it so much

A white r34 gtt for 15k on carsales in vic.. anyone recently test drove that car?

I really like it but the body need alot of tlc.. few rust points and paintwork is average.. boot had like bolt holes, like I said a fair bit of tlc

Would buy this if price was right.

Oh.......

My main concern was it veers to the left..

please weigh in on this comment please...

I didnt see evidence of accident damage and might be need of a alignment is all..

Based on info for car 2.. seller asks 15k

Whats a normal price to offer him?

post-41675-0-91384400-1402830394_thumb.jpg

I would stay away from the first one you saw.

The second one sounds like it could be alright..plus with the money you would save, you could put it towards cleaning it up abit.

This is of course without me seeing it or test driving it.

Wouldn't go anywhere near the first one...

And $15k is way to much for a stock r34GTT even in ok condition.. I couldn't get $10K for mine a year ago, as there are a lot more sellers than buyers... If the body needs a lot of work (as per your comments) I recon you'll get it or something like it for WELL under $10K.....

The car should have both the blue import/compliance plate (can also be a green plate, yellow plate or pink sticker/plate, which is put on when the car is complied once it is in Australia), plus the silver chassis plate (which is put on in the factory in Japan when the car is first made)

Walk, nay run, away.

For $15-18k you should be looking at immaculate 34 GTTs. There should be no rust, no missing stuff, no veering, no funny business.

If you have patience, get in touch with one of the well regarded importers on this forum (ie. Import Monster) and import your own. Otherwise put up some info regarding where you are looking at cars and some of the more experienced guys may be able to inspect them with you.

I only paid about $20K for my (then!) emaculate R34 GTT thirteen years ago when it was only a couple of years old, there is no way I'd be paying $15k for one now.... I still recon you should be able to pic up a reasonable one for well under $10k - rember, they are getting to be pretty old cars now...

I have been noticing the same thing price wise. I am looking at buying a 34 turbo sedan and yet the prices for the things are still pushing 15k in a lot of places. I think people have an unreasonable idea of just how much their cars are worth and don't check out redbook for even a basic idea.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
×
×
  • Create New...