Jump to content
SAU Community

Newcasle


NYL83R
 Share

Recommended Posts

  • Replies 126
  • Created
  • Last Reply

Top Posters In This Topic

Mark: Thanks for the tip. The motorbike course yesterday was so boring. Was all silly stuff you should already know - how to mount a motorbike, how to engage clutch, how to start motorbike etc. When the time comes to do the P's test, you can give me some pointers. Is the L's computer test at the RTA difficult, or just common knowledge?

Chris

Link to comment
Share on other sites

Mark:  Thanks for the tip.  The motorbike course yesterday was so boring.  Was all silly stuff you should already know - how to mount a motorbike, how to engage clutch, how to start motorbike etc.  When the time comes to do the P's test, you can give me some pointers.  Is the L's computer test at the RTA difficult, or just common knowledge?

Chris

Yep I hear you. Super boring. You don't go over about 30kmh and 2km from my house is an 80 zone I take to work - so very daunting when I had zero bike experience...took a few days to warm up (read: build confidence!) to doing 80.

I'd be very happy to pass pointers for the P's. The best advice I can give right now, is to plan on hiring a CB for the test. If you ride a ZZR or a CBR or anything like that, the U-turn and cones are nearly impossible. My ZZR was plenty fast, but designed for handling at speeds above walking pace. I practiced for probably ten hours over a few weeks (in a cul de sac) and still only just scraped through on the ZZR. I tried the test on a CB250 and nailed it 100% (no touches/ feet down/ etc.)

Re: the comp test - take the time to study up on the bike stuff. There is all the normal L-permit q's, plus lots of bike specific. An hour of reading will prob save you time/effort/$$. Most if it is the stuff you forget 5 mins after leaving the RTA, like how close in metres can you park to a bus zone? and similar stuff.

Well now that I've typed all this I realise it I should have sent it via PM. Apologies to all the guys reading this who don't ride! :P

Mark

Link to comment
Share on other sites

Whilst I'm in the Newcastle thread, to any other guys in the Bay/Medowie/Terrace/Maitland area (ie. northside) always seem to get stuck behind people driving at 80kmh in the 100 zones? Richardson road past Grahamstown dam, and the road out to Maitland are terrible for it.

I don't understand it. Are the drivers unaware? I find that hard to believe as it happens too often to be tourists/non-locals. Which makes me think that it must be people who choose to do 80kmh in some attempt to reduce road accidents... whilst everyone else gets fed up and overtakes (higher risk, yeah?).

I'm sorry guys, I just feel like ranting, cause I get so sick of it. You overtake and the driver is happily tooling along below the speed limit. The areas are 100 for a reason - there's nothing else there! No merging, no driveways, nothing! And I seem to get the "Flashy Flashy" high-beams from them as I pass, as if I'm some P-plater driving a turbo V8 with a car full of passengers in the middle of the night!?

Man, people need to get a grip. Self-included. I know i'll get where I'm going eventually, but to me it highlights the driver ed thing. If people are uncomfortable being in control of their 2-ton 4WD at 100kmh, either go take some professional training or ask someone else to drive.

*sigh*

Mark

Link to comment
Share on other sites

SHOULD COME!  

Fresh ?? paul and stace?? mic33r?? ER34GTT?? BNR32?? guilt top?? lenno ?? bojo1???

Sorry guys, I've just been really busy lately. I'll try and make it to a cruise next year (assuming my car isn't sold by then), but it's just hectic at this time of the year.

Link to comment
Share on other sites

Whilst I'm in the Newcastle thread, to any other guys in the Bay/Medowie/Terrace/Maitland area (ie. northside) always seem to get stuck behind people driving at 80kmh in the 100 zones? Richardson road past Grahamstown dam, and the road out to Maitland are terrible for it.

I don't understand it. Are the drivers unaware? I find that hard to believe as it happens too often to be tourists/non-locals. Which makes me think that it must be people who choose to do 80kmh in some attempt to reduce road accidents... whilst everyone else gets fed up and overtakes (higher risk, yeah?).  

I'm sorry guys, I just feel like ranting, cause I get so sick of it. You overtake and the driver is happily tooling along below the speed limit. The areas are 100 for a reason - there's nothing else there! No merging, no driveways, nothing! And I seem to get the "Flashy Flashy" high-beams from them as I pass, as if I'm some P-plater driving a turbo V8 with a car full of passengers in the middle of the night!?

Man, people need to get a grip. Self-included. I know i'll get where I'm going eventually, but to me it highlights the driver ed thing. If people are uncomfortable being in control of their 2-ton 4WD at 100kmh, either go take some professional training or ask someone else to drive.

*sigh*

Mark

I know exactly what you mean. The palce I used to get stuck all the time was on the way to Williamtown from Newcastle on NB road. I used to work out there, so I'd have to put up with it daily. It was crazy.

Link to comment
Share on other sites

Yep it's up for sale on Carsales right now. I've had it since 2001, so it's time for a change. I'm staying in the import scene though, but going across to Toyota. Hopefully I'll be in a JZX100 Chaser by the start of next year.

The Skyline was good, but I just don't drive it much anymore. I'll still be a regular on the forums though, as I can't find any decent Toyota forums (and I like this place).

Link to comment
Share on other sites

Mark: P's shouldn't be too hard on my bike I've already got, a TTR 250 and the instructors told me its very easy to do the U-Turn on a trailbike. I bought this a month ago, then realised you can get up to 650cc on your L's on the weekend. I would have a gone a XR400 or similar, but the 250 will be plenty quick enough for now. Organising a sand paddle and 2nd rear rim so I can take it out on the beach!!!

Link to comment
Share on other sites

Hay Guys,

just seeing if any one is up for a cuize in early Jan, i ahave had my car for about 4 months now and i a m keen to got for a cruize with some other lines. Even for a small cruize to the bay or similar.

Ta

P.S have a good and safe Chrissy.

Link to comment
Share on other sites

  • 2 weeks later...

Gezzzz that seems like a huge cruze, I'm up for it. I Just hope im not feeling too seedy that Sunday. Actually I'll go just for the fact I wana see a heap of another skylines all at once, Line up the whales in force~! Should be some car mags taking shots too.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...