Jump to content
SAU Community

Help With Final Colour Choice

Black Dog
 Share

Recommended Posts

Black Dog Enthusiast

Black Dog

Posted
Posted

Some will have seen that I started a previous thread about Black colour cars. I was pretty set on getting one in black but thanks to some helpful advice and I also had a chance to see one in person, I have decided against it.

It would frustrate the hell out of me to keep clean.

So I've pretty much narrowed it down to one or two colours. However I can't see any of them in person, as I live in the country and I'm pretty confident no one has a V36 in my neck of the woods.

So once again if anyone has had any experience with the colour cars that I will attach a picture of please let me know. Or any advice in general will be great. It's for a 2009 & up V36 370GT Coupe SP.

post-134916-0-03576000-1403527293_thumb.jpg This is Slate Blue. I like the colour, however I'm not sure if it will show every little mark like the Black colour?

post-134916-0-37090100-1403527335_thumb.jpg This is Graphite Shadow (I think) I would think there wouldn't be too many dramas with this colour.

post-134916-0-66215600-1403527754_thumb.jpg This is normal silver I reckon. This is the colour I would normally pick, however I'm pretty sure seeing the colour in person and in the sunlight, it is a very light colour. Not as dark as the photo? I don't want it looking too light & washed out.

Any input would be great. It's the last thing I need to get sorted before I can order the beast :)

My ideal colour would be a Chrome like Silver but I'm pretty sure it doesn't exist.

Cheers,

Paul

Link to comment
https://www.sau.com.au/forums/topic/444800-help-with-final-colour-choice/
Share on other sites
Black Dog Enthusiast

Black Dog

Posted
  • Author
Posted

graphite shadow and silver ftw...i personally have the silver and it's an awesome colour :)

Does the silver look really light, compared to other silver colour cars? It's really hard to tell looking at a rendered pic, compared to real life.

Graphite. Slate blue looks really elegant but it will be a bitch to maintain.

Yeah love the Slate blue. The getting dirty part doesn't worry me so much. It's the showing up of every little scratch & swirl mark, like the black shows that does me in. So I'm not sure if the Blue would be like that? So hard not seeing in person... That's what I need to know.

I've got the graphite, very easy to maintain. If it gets very dusty, ends up looking like it's silver

Love this :) big +1 My way of thinking.

If someone knows if the Slate Blue would be like black, please let me know. If it is, then it's a no brainer for me, Graphite all the way I reckon... Damn hard.

colin.ssc Mentor

colin.ssc

Posted
Posted

Does the silver look really light, compared to other silver colour cars? It's really hard to tell looking at a rendered pic, compared to real life.

Yeah love the Slate blue. The getting dirty part doesn't worry me so much. It's the showing up of every little scratch & swirl mark, like the black shows that does me in. So I'm not sure if the Blue would be like that? So hard not seeing in person... That's what I need to know.

Love this :) big +1 My way of thinking.

If someone knows if the Slate Blue would be like black, please let me know. If it is, then it's a no brainer for me, Graphite all the way I reckon... Damn hard.

The silver is light...very similar to the R34 silver. A little lighter actually. PM me if you want a better picture to look at, ill send you a few.

Slate blue is not too bad but not my cup of tea at all. I think the graphite is the best of the lot. Couldn't find one for over 3 months and the silver one came up so I took it.

Black Dog Enthusiast

Black Dog

Posted
  • Author
Posted

Graphite mate! Itll look boss with some nice black rims.... ughhhh nuff said

Yeah Graphite is looking pretty sweet at the moment. Glad you said about the black rims. That's what I was thinking, just wasn't sure if it would be a good look or not?

P.s why not white?

Seriously.... ;) Nah, sorry no offence to owners of the white. Just not my style. Mind you I have seen some great ones with blacked out rims and windows. Just not what I'm after for my 370GT Coupe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Milkmun
      Help Understand GTT Boost Setup

      By Milkmun · Posted

      Glad it all went smooth. How long did the tuning process take?
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • B-Boi34
      UniClutch

      By B-Boi34 · Posted

      I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Kinkstaah
      Help Understand GTT Boost Setup

      By Kinkstaah · Posted

      Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...