R32 Gtr Hicas Delete.

[MJTru]

I was wondering if I did the electrical part of this mod right. I took all the lines and solenoids out, one under the rear suspension area and the next up front by the intake manifold.

Next I took all the hard lines off the bottom of the vehicle. I then looped the cooler line back in from the supply line for the solenoid that was around the intake manifold.

The part I'm worried about is the modification of a wire that i should cut on the hicas ecu. The instructions I followed is for the gtr and was wondering if its the same for my r32 gts4? ?? I cut the green with white strip wire please check the attached photos for more detail.

Thanks

[JordansR32]

Why did u have to cut that wire? When I did the hicas removal on my 32 pulled all hicas out completely but didn't touch the hicas ecu, everything seems fine.

[R.3.2.G.T.R]

that would be to stop dash light, I just de-pinned, hicas ecu still in place

[MJTru]

that would be to stop dash light, I just de-pinned, hicas ecu still in place

Yes I had two options. One was to remove the actual bulb but was not the best option. Next was to cut this wire to stop communication from hicas computer. It seemed to be the best solution. But I just wanted to know if it was the same as a r32 gtr.

I will post the link used for the modification.

Edited June 25, 2014 by MJTru

[MJTru]

http://mobile.dudamobile.com/site/TheSkyLife?url=http%3A%2F%2Fwww.skylife4ever.com%2F2011%2F01%2Fhicas-delete.html%3Fm%3D1

[GTSBoy]

The easiest thing to do is simply to leave the HICAS CU in place and unplug the smaller of the two plugs. All you have to do really. I did it 15 years ago. 15 years!!