Rb30&rb26 Cas Differences (Microtech Ecu)

[xeturbo]

Hi guys,

Currently I'm running a single cam RB30 using a Microtech LT10s, X4 ignition box and Toyota twin post coil packs running waste spark.

I'm half way through building an RB26/30 and would like some information on how the RB26 CAS works/compares to the RB30 one in regards to its trigger outputs etc? as I would like to continue using my microtech setup as it its performing quite well.

Does anyone know if the microtech I'm it's current configuration will read the rb26 one, or will it need to be reprogrammed? Also another thought I had if they are different was to put the RB30 trigger wheel inside the RB26 housing?

Thanks for your help,

John

[Ben C34]

Can't you you ask microtech?

Wouldn't microtech be able to supply a disc that would work in the rb26 cas, if needed?

[Ben C34]

http://booztd3.powweb.com/Pictures/Tech/CAS_AEM/Cas_6.JPG

That's a 26 disc.

Does it look like the one one in your 30?

[xeturbo]

Thanks for the replies and info. I spoke with Microtech today and the trigger discs are different and the ecu will need to be returned to Microtech, however it is a simple change and was quoted $135 for this service.