My R33

[blake wright]

Hey guys!

Was curious to know, as i'm about to start on my rb25/30 build what things will i be needing to know and was there any headaches i can avoid? Anything that will be needing to be custom made or anything i will need to plug or create into the engine block?

Any infomation on this build will be appreciated.

Thanks guys!

[GTRPSI]

What car is it going into?

Thats the main point, also use the later blocks with the oil and water feeds drilled out, the tensioner area is also flat which makes life easier.

[blake wright]

Its going into a r33

And cheers ey!

Edited June 27, 2014 by blake wright

[GTRPSI]

GTR?

[blake wright]

Gtst

[GTRPSI]

Use the later block with the water and oil outlets on the hot side, they also have a flat tensioner area in the front.

Earlier ones have the oil and water outlets cast on the block but not drilled and tapped to take fittings, some also dont have a flat tensioner area on the front where the water pump is.

Block is 38mm taller so expect to extend your piping.

There is a well written detailed write up on it, study it.... http://stevenwelsh.site.net.au/RB30_DOHC.pdf