Window Adjustment Help Asap Please

[Peanut92]

No where on google sau or any skyline forum has anything to do with adjusting the window

So my dilemma

When I rolled my windows up after installing a new door shell the window would wind up and not slide into the seal but pop on the outside

I noticed there's adjustment on the front bailey channel 12 mm nut on a stud that's adjusted with a flat head

There's 2 on the rear bailey channel

2 felt guides

And 2 height guides

And another too centre to the door 10mm nuts not sure what these do

I've fiddled around for the good part of 2 days

Finally got it so the door closes properly with the window up ( sliding into the seal properly

Then before I put the door trim on. I tested putting the window up while the door was shut. Lucky I did because once again it was hanging too far out at the top and not going into the seal

After further tinkling I sorted that out

But now when I drive it won't slide in properly. Only when I'm stopped

More tinkling

And I've got it anything 60km and under on a flat road it works fine but any faster or a slight bump won't let the window slide into the seal

About to burn the car. Does anyone have the slightest clue to what I should be actually adjusting?

Or can anyone tell me what each adjustment does. This will give me a better indication as to what I need to focus on

Currently randomly moving different ones

[R.3.2.G.T.R]

u got a copy of the workshop manual?

door.PDF

[Peanut92]

Unfortunately no

Where's the best place to get a good one

[Sinista32]

um he posted it in the .pdf attachement

Edit: Haynes Manuals in Padstow NSW is the best place to buy one. Link http://www.haynes.com.au/webcontent4.htm

Edited July 1, 2014 by Sinista32