Jump to content
SAU Community

Recommended Posts

On different setups, I ran the GTX2860's with the stock anti surge front housings with welded on flanges in my 2.8. In short they come on boost later than a 2860-5. They are quieter though

he modified the gtx housings to fit the Gtr

Yes married Thursday

I'M back again with more news... mechanic told me my oil seal is leaking and if i dont change it, turbos will need rebuild. Since I'm not doing any mechanic on my car, i thought.. if im going to pay labour $ to have my seal/gasket redone, I might as well check my turbo and swap them with brand new turbos to recover optimal performance of the car.

I found out about a company called Pure turbos..

They ask 1100$ to have both turbos rebuilt with new brass cage and new billet wheel. ( they say it will be as good as brand new turbos , if not better due to brass cage and billet wheel)

Now heres where i need your help... they offer me a 60mm billet wheel which should yeild a 40hp/per turbo upgrade ( probably taken from the gtx2860's figure) and a 63mm which would yeild 80hp/per turbo. They say turbo spool shouldn't be noticeable and if it was their engine, they would go 63mm.

I'm scared the 63mm will actually be too laggy and i have doubt about their claims on spool. if I had 2.8 stroker.. it would be a different story, but I'm only on a rb26 with 86.5mm.

What front compressor housing are you using, normal -5 or surge slotted? You will be more at risk of compressor surge with a bigger compressor wheel.

-5s housing !

Considering you only wanted 500-550 Whp, it's a not brainer. 60 MM wheel!

I also feel the same.. but you know.. if the lag is going to be 200ish rpm and your gaining an extra 40hp/turbo.. it's interesting lol.

200 rpm is heaps!!!!

Very true, people don't seem to understand what a few hundred rpm can do to a car...

My T88 on dyno was only 500rpm (ish) slower to get 15psi on the dyno compared to the 6262, on the road/track it went from being horribly laggy to very responsive

  • Like 1

^^ *like*.

Micko's old man changed his exhaust and went back to a stock airbox on his GTR. Overlay the graphs and it was 200 rpm everywhere. TOTALLY different car to drive. It went from a car which did nothing under 5000 rpm to be able to drive it quickly quite easily.

60mm. Do it. Don't forget you have a 2.6 too. A bigger engine you'd get away with it.

  • Like 1

Some open pods. Mmmm all that yummy hot air!

It was a 33 though. Different design to a 32 box.

I know I'd make more power going back to an air box but I'd never thought about earlier spool as I wouldn't have thought it would have made a difference.

I'm pretty sure I'd still be fine with a standard box at 325kw.

The whole shebang coming on earlier was more to do with sorting the pos "jap" exhaust out. Getting rid of the rubbish restrictive mufflers and mismatched pipes. Going back to the airbox was just something he did at the same time.

  • Like 2

Yep picked up 15-20kw throughout the midrange to redline. Was a night and day difference really was much nicer to drive and also made power feel more progressive not just a BANG & it was alive at 5000rpm :)

Very true, people don't seem to understand what a few hundred rpm can do to a car...

My T88 on dyno was only 500rpm (ish) slower to get 15psi on the dyno compared to the 6262, on the road/track it went from being horribly laggy to very responsive

There are times I've seen NO difference in spool on the dyno and still a very noticeable difference in practical use - dynos can be quite misleading at times!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My take on gg2 48mm, 54mm, 58mm, and 62mm compressor map for same size compressor vs gg1 : All gg2 only outflow gg1 above 20 psi. As all g gen 2 surge line at lower left of comp map move to the right, all gg2 sacrifice spool vs same size gg1, surge line move to the right worst for 54mm gg2. So for same size compressor if you want best response, use gg1, if you want max hp at >20psi use gg2 but you will be laggier vs same size gg1. Max compressor efficiency drops to max 75% on all gg2 vs max 76%-80% of same size gg1. Iirc lower efficiency means hotter iat less dense air so lower hp at same operating point of comp map. Also curious why gg2 is mapped to lower max rpm vs same size gg1 (only 48mm size both gg1 gg2 mapped to same rpm) : 54mm gg1 165,000 rpm  vs  gg2 160,000 rpm. 58mm gg1 150,000 rpm vs gg2 140,000rpm. 62mm gg1 145,000 rpm vs gg2 140,000 rpm. If gg2 can safely spin to gg1 rpm then they can flow a bit more than as mapped. Good thing that all gg 2 interchange compressor and turbine housings with same size gg 1. So gg1 owners can buy gg2 chra only if planning to boost >20psi.
    • My stuff is all with Shannon's, granted, I don't really have imports I'm driving on the road, however, I've had multiple cars at the same time with them. Presently we have the Landcruiser on laid up cover, Sarah's Kluger on full cover, and the house insured. About 18 months ago Sarah wrote her Subaru Liberty GTB off, insured with Shannon's, and the payout, and buy back of the wreck was super quick. In 2020 we had the VF Commodore totalled in a major hailstorm. Storm was on the Saturday, I called on the Sunday and lodged it, vehicle was towed on Tuesday night, assessment team called on Wednesday to say it was a total loss and get payout details, money was in the bank on Thursday morning. Have had a few other claims both at fault, and not at fault, over the years, and never had an issue with them.   Funnily enough, they're also the cheapest insurer I find for things like Sarah's Kluger.   I will say I'm less impressed dealing with them lately around "the experience", as a lot of their staff that you deal with aren't car enthusiasts. Shannon's has a much more main stream feel ever since they decided to become "big corporate", laid a heap of staff off, and then hired a bunch of non enthusiasts. At the same time they've been making a push to be less "call us and we'll personally have someone who cares help" to "hey, this computer can do stuff for you" and are trying to get more square pegs to fit round holes. (That's just the vibe I get from them). Again, have had no issues with claims with them, but get a bit of a "less personal" feel from them.
    • A thing I wasn’t happy with with enthusiast was during the initial phone call they told me they’d insure it for 130k but needed photos.   I then sent them photos and they told me $80k as there were other cars either similar modifications available for around that price, I told them to send me the links to said cars so that I can buy them. i then sent the modification list with prices of the parts (no labor) and the price then came to 115k, which is still shy of the 130 that was agreed in the initial phone call 
    • Ask me a bit later this week before payday
    • I agree that delayed payment probably isn't the most suitable solution. It seems a solid complete transaction would be best. As I wouldn't be using this sale as a line of credit that would typically earn interest, we can probably arrange a much cleaner single transaction deal. I can do $92.52 today. Would you prefer EFT, or Cash on Pickup?  😛
×
×
  • Create New...