Jump to content
SAU Community

Sau Vic Tech Night: Discussing E85, Thanks To Wolf Motorsport & Sabbadin Automotive


Recommended Posts

Can someone film the night for us NSW people :)

We are working on getting a video done, providing all goes well will post up once completed after the event.

  • Like 1

Fantastic turn out tonight! Thanks heaps to everyone, especially Robbie from WOLF Motorsport & Rob from Sabbadin automotive :)

  • Like 1

Heaps of great information and things to look out for :)

There were plenty of pics taken, but unfortunately no video of the tech night this time around.

Thanks for the informative evening.

The E85 sensor lesson and how it reads was a eye opener, especially when they turned E85 to E100 by just adding water to the fuel......and the amount of tanks of E85 to run to clean out the 98 and get back to a higher ethanol content.

And the oring lube that turned to jelly and blocked the injectors leading to engine failure.

Certainly made me rethink the route im taking to fuel setup.

Edited by GTRPSI

Oring lube? What sort of dropkick uses petroleum jelly to fit injectors? A tiny bit of silicone spray is enough and won't ruin anything.

Sounds like it was an ethanol bashing night. Wish I had been there now to dispel the rumours.

Sounds like it was an ethanol bashing night. Wish I had been there now to dispel the rumours.

lol. not many benefits were mentioned that aren't commonly known, but it was good to know whats involved for piece of mind.

to summarise, you could say the evening focused on:

- things to do or at least keep in mind when converting

- things to keep in mind when running (and buying E85)

- things to do to maintain your car when running E85

Oring lube? What sort of dropkick uses petroleum jelly to fit injectors? A tiny bit of silicone spray is enough and won't ruin anything.

Sounds like it was an ethanol bashing night. Wish I had been there now to dispel the rumours.

Just mentioning what they had seen, customers fitting orings like that without issues in the past because 98 disolved it but E85 reacted differently leading to engine failure.

I was surprised i didnt see your face there scotty, spewing your wernt there for some myth busting. :)

And what about the petrol you buy, do you worry about that?

yeah.

thats why i use 98 from one chain of petrol stations.

im glad E85 is regulated (from Nov 2012) but when United are only supposed to tell you the ethanol content, i was surprised that United wont tell you the RON rating. and when the ethanol content is down to 70% during winter months, I wonder what the RON would be then? for safety you would want a flex fuel meter guiding the ECU to make sure the mixtures are consistent with the fuel (at least i would anyway)

im not bagging the fuel, just playing devils advocate because its not for everyones budget or application.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Depends how low and tyre size. Should fit with natural camber, skinny tyres and rolled guards.
    • Hi guys, planning to get 18x9 +25 in fronts and 18x10 +25 in rears been reading the whole thread and cant really find anything   Anyone know if these will fit a r34 gtt with no scrubbing or guard work needed?
    • They usually get made by hand as part of any such swap.
    • Was planning on getting an R35 MAF and the adapter, should this be okay? Also any idea where I could get my hands on an intake pipe?
    • I mean yes, if you're starting from scratch on an unknown engine yes you don't need to be doing all kinds of math in the background but if you're doing relatively minor changes like AFM + injectors + boost up with some aftermarket turbos it takes quite a bit of math if you want to do something like maintain OEM fuel + timing tables but compressed and then a bit more load scale up top. I think I've spent too much time working on big engineering nightmares though so I'm a big fan of trying to constrain the scope of whatever work I'm doing as much as possible and trying to get it right before moving on. For example, a local owner just did the usual E85 + single turbo conversion to his R32 GTR and nearly burned his car to the ground doing some spirited driving up the local mountains. Turbine is unshielded and too close to the hood insulation. It's tough to balance "just get the project done" and "seemingly small details can cause massive setbacks I'm not willing to deal with".
×
×
  • Create New...