Jump to content
SAU Community

Recommended Posts

first off... hello all. my first post. i have been a long time lurker here and i am just crawling out from under my rock now.

second... i am not from australia! sorry... i am actually from canada. we do have a forum http://www.gtrcanada.com but it is not as well established as SAU.

i am hoping an importer or someone here may have seen this car go through auction in the last 2 months:

http://vancouver.en.craigslist.ca/van/ctd/4522279514.html

00404_boKmq3LufGE_600x450.jpg

00j0j_aPtb119nLyS_600x450.jpg

the dealer that is selling it is new, and they will not release the auction sheets or the japanese chassis number/vin unless it is a serious buyer. i am worried that this car may be misrepresented, as i was almost scammed before and now i am scared of anything RHD.

any help is appreciated.

the dealer told me the car has just landed here and is going through compliance right now so i cannot view it in person.

i thought at the very least i could do an odometer check online and go from there.

Edited by DN1097

an importer has come forward and he thinks it might be this one? if it is true, then it sold at auction for 3760 000 Yen ($40k CDN). he told me that if he were the one importing it landed cost after taxes in canada would put it around $50k cdn before compliance and markup.

can anyone translate the sheet? i only understand the grade 4.5, and the mileage indicated appears to be genuine and matches what is advertised?

post-135343-0-19682900-1404088753_thumb.jpg

post-135343-0-71332400-1404089691_thumb.jpg

Edited by DN1097

This car looks to be genuine as per the paperwork. If an importer has told you it would cost circa 50k landed excluding compliance, then theoretically $62k is not a bad 'retail' price, depending on what needs to be done for compliance (not too familiar with how stringent Canadian laws are). The way I've read the de-reg paper above there is some minor imperfections or repaired/repainted portion of the front right quarter panel, but I could be wrong? (year 12 Japanese class was a long time ago). If you'd like to buy a car at cost price then you'll be in need of a broker.

Good luck

  On 30/06/2014 at 1:10 AM, torquetalker said:

This car looks to be genuine as per the paperwork. If an importer has told you it would cost circa 50k landed excluding compliance, then theoretically $62k is not a bad 'retail' price, depending on what needs to be done for compliance (not too familiar with how stringent Canadian laws are). The way I've read the de-reg paper above there is some minor imperfections or repaired/repainted portion of the front right quarter panel, but I could be wrong? (year 12 Japanese class was a long time ago). If you'd like to buy a car at cost price then you'll be in need of a broker.

Good luck

thank you for the translation.

compliance here is commonly described as a glorified safety inspection, from ensuring that the tyres are road legal, to worn ball joints. and issuing a new registration number. they will add daytime running lights and reflectors as per code here. there will be an emissions test as well. but as for other things like whether the transmission is grinding synchros or the turbos are blown is not their problem. we do allow aftermarket modifications like blowoff valves, exhaust systems, etc., but i am not looking to do heavy modifications and turn it into a money pit.

Edited by DN1097
  On 30/06/2014 at 12:39 AM, DN1097 said:

...and he thinks it might be this one? ...

Is there a way Benjamin that you can cross-check the VIN# ???

How can they expect to sell a car "sight-unseen"?

You must have the right to check it for rust at the outset + 100 other things...

How can they deliberate who is a serious buyer? I would never give them a down payment or any other type of information which shows what money or assets i own for a piece of paper .

Also thinking and knowing that they are the papers for that car are two different things.

Just hang tight, and wait for your 'dealer' to get back to you. If they arent forthcoming and open to talk about the cars history and or whereabouts and for you to do what ever is necessary to proceed with making a large deposit, i would walk away.

There will always be another one.

Or pick one yourself and have the satisfaction that 'that one' is the one you've always wanted.

  On 30/06/2014 at 1:59 PM, Stagea97 said:

I must be missing something.

He said the dealer wouldn't release the vin or any details. And that sheet is what another dealer thinks the car might be.

another importer messaged me privately and said he saw what he thinks is this car go through auction recently and pulled the pictures and dug out the auction sheet for me. the one he found appears to have the same fog lights in the front bar, and in another picture i did not post, it has the same parking lot permit sticker in the corner of the glass. also, the mileage is close, so it is my assumption this is the same vehicle.

[edit]: someone on gtrcanada responded back with the same info.

sorry for the confusion.

Edited by DN1097
  On 30/06/2014 at 1:34 PM, Iron Chef said:

That sheet looks fairly legit to me - it says Prime Corner at the top, meaning the good stuff. If it's not legit, it's a very impressive fake.

thank you sir.

i might as well ask you here... do you offer your services to buyers outside of australia? i am from canada, and our 15 year old rule has now made the 1999MY GT-R valid for importation here. many of the local importers makes some of your local ones look like upstanding businesses so i'm forced to look outside of the box per se.

Edited by DN1097

Yes I'd seriously look at the yellow V-Spec. There's a whole lot of fruit on it. Even just one item - the titanium exhaust - is worth $2K. Contrary to the description of no lag, HKS 2530 can be a bit laggy but they are remarkable as they spool up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...