Jump to content
SAU Community

Recommended Posts

Hi All

Question for any R34 owners out there. A while ago I fitted the Aero/Altia/Whatever you call it front bumper to my R34. This one came with the Foglights, as pictured.

Before this my car didn't have them fitted. So the foglights aren't wired up to anything.

I've also procured the switch for them that goes in near the headlight level adjuster (near right knee) (2nd pic, on left).

r34_10.jpg
FFog%2001.JPG

I like to keep things as clean and as factory as possible. I'd prefer to avoid having to hack in a custom loom to make them work, especially if the stock loom already has everything needed already there. There is a "fog lamp" fuse in the engine bay fuse box, which is live (20A). It looks as though the car's standard wiring loom has most if not all of the wiring, so I'm hoping this could be a simple plug-and-play affair. However I can't locate any of the wiring under the dash to hook into.

Does anyone have a R34 with these lights factory fitted and functional who could shed some light on where everything connects? Namely the switch, the lights themselves, whether or not there's any relays, and how the car behaves (eg, do the lights only come on with headlights, does the fog switch turn parkers/headlights on as well, etc).

Furthermore would there be anyone in Sydney with these lights who would let me have a poke around their car to work out how these are wired in? As you all probably know, there aren't any complete wiring diagrams floating around on the internet for these cars, so I'm forever having to poke around with a multimeter..

I have scoured the internet as best I can but the info I'm after just isn't out there.

Anyone able to help?

Thanks!

Edited by Rake
Link to comment
https://www.sau.com.au/forums/topic/445438-r34-fog-lights/
Share on other sites

  • 1 month later...
  • 8 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are a few different ways of doing it. I'm currently running two 1000cc pre-TB nozzles and PWM the pump for control. I'll be moving over to a constant pressure system and direct port. I'll run the pump off a regular relay, have it cycle on roughly 5psi before I start injecting to build pressure and then PWM a WMI solenoid (It's basically an injector that can take a lot of pressure and not corrode with water and meth.) The solenoid feeds the 6 direct port ~200cc nozzles. I'll also keep one ~250cc pre-TB nozzle to help keep IAT's in check.  Safety will be a little different as well. I used to use a pressure switch but will be moving over to a pressure sensor between my solenoid and nozzles. I'll trigger my solenoid and if I don't see specific pressure within a specific timeframe (e.g 100psi within a second, 175psi within 2 seconds), I kill it and revert back to non WMI maps the same way I did it before with 4D in Haltech. I was just figuring out the timers in my ecu last night. They made that a little more complicated than I would have liked... I wish Haltech offered a larger set of logic/math functions like other ecu's do. I can't do very much with just AND's and OR's.  I've been asked to do fuel/ignition mapping on a medium bore engine at work in May (192L V16). Being the only programmer in my region and having went and opened my mouth about knowing the ins and outs of fuel/ignition mapping, I have now been deemed an expert. Fun fun. The entirety of the logic and algorithms are programmed in C on a PLC. As I spend more time figuring it all out, I like what I see and eventually I may consider doing the same as a pet project to replace my ecu.   
    • This would be interesting, would you feed it via a 2nd row of injectors? Or just usual WMI nozzles?
    • Cut sump up and extend. Win win 😂 
    • All, What's the recommended torque for the 1/2 head studs for RB30 twin cam conversion with RB26 head?  
    • also, we need to know which solution worked....
×
×
  • Create New...