Jump to content
SAU Community

R33 Complete Part Out

MickoLis

By MickoLis,
in Classifieds

 Share

Recommended Posts

«Cyph3r» Experienced

«Cyph3r»

Posted
Posted

Hi mate,

I sent you the text about the parts I'm coming down to grab tomorrow.

I just thought of a few little other bits and pieces I might need but I'll talk to you about that tomorrow when I see you.

Any chance of texting me your address tomorrow when your up and about.

Cheers

Jamie

MickoLis Enthusiast

MickoLis

Posted
  • Author
Posted

Seat belts front - $50

Rear seat belts - $50

Carpet 30 (would need a clean)

Front seats $50 a piece

Rear seat$50

front seatbelts $50 each

Rear seat belts $50 total

Center console $35

rear quarter panel trim 50

Rear bumper 50 (has some paint flakes)

Wing mirrors 100

Door sills 10 each

Standard steering wheel 25 (some wear)

Door cards $50 each with switched. Will separate the switches

Brake lights $50 each

Boor lid with spoiler 100

Passanger side front guard $60

Standard exhaust with heat shields 75.

Intercooler 100

Map sensor 50

For any other parts just ask.

Open to offers.

That car is completely standard. No mods at all.

I'm happy to post parts at buyers expense.

  • 2 weeks later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Returning after a long time!

      By PranK · Posted

      Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • CEF33Y
      Report that engine failure

      By CEF33Y · Posted

      Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
    • GTSBoy
      Returning after a long time!

      By GTSBoy · Posted

      Done
    • Shizu
      Returning after a long time!

      By Shizu · Posted

      Thanks buddy. I thought it was a server storage thing. 🤣
    • TheBushKangaroo
      Hello fellow enthusiasts

      By TheBushKangaroo · Posted

      Perfect! Thanks for this, both look like great options!
×
×
  • Create New...