Jump to content
SAU Community

Recommended Posts

For sale I have my 1995 Nissan Skyline R33 GTR, the cars exterior and interior are very clean. Garaged in my ownership and presumably in the past from the condition of the paintwork. I am the second owner in Australia and I purchased it from an older gentleman who brought it in as a personal import. It currently sits on 93,850kms and has 3 months rego left.

I have owned the car for 3 years now and have only put on just over 10,000 km/s. During this time it has undergone an early 100,000 km service using all genuine Nissan parts performed by a reputable Sydney workshop. It has also been serviced every 6 months using Penrite 10 tenths racing synthetic oil. I have also recently replaced the fuel filter. I've never used it to its full potential at the drags or circuit events.

During these 3 years of ownership the car was 100% dead stock. Over the last 9 months it has undergone a huge transformation in performance and aesthetics bringing it from a bone stock twin turbo to a single turbo animal. The engine itself is very healthy with no blow by and 152-156 PSI across all cylinders. It’s currently making 349.5rwkw on a safe dedicated e85 tune. All the gaskets have been changed to metal multi-layer nitto gaskets. All the hard work has been done, just get in and drive.

Some of its features Include:

-Single Garrett GT3582r with .82 exhaust housing with turbo beanie

-Custom Built stainless exhaust manifold fully heat wrapped

-44mm Tial Wastegate with screamer pipe

-4inch into 3.5 inch exhaust with magnaflow muffler (not very loud and sounds excellent)

-100mm autobahn88 tube and fin intercooler with hard pipe kit.

-Custom Stainless catch can set up which includes washer bottle

-Red crinkle Powder coated engine covers (have left some off but have them all for the buyer)

-Rebranded KOYO aluminium radiator running stock fan and shroud for max. efficiency

-ID2000 Injectors

-New Splitfire coilpacks

-New Coilpack wiring harness

-Walbro 460 E85 fuel pump

-SRI Anodized alloy adjustable cam gears

-Latest Adaptronic Stand-alone ECU

-innovative wideband unit

-Jun carbon fibre front lip

-Brand new genuine badges front and rear

-HKS hypermax coilovers

-OZracing 18” wheels

There will be a bit I have missed, so if you are a genuine buyer please do not hesitate to give me a call to discuss any further. If you are after a clean r33 gtr with everything already done this is the car for you.

Im asking $23,500 for the car.

Im Located in sydney and can be contacted on 0404 111 174.

post-75081-0-45770900-1405241320_thumb.jpg

post-75081-0-79325600-1405241331_thumb.jpg

post-75081-0-02360200-1405241349_thumb.jpg

post-75081-0-49203600-1405241363_thumb.jpg

post-75081-0-57627600-1405241378_thumb.jpg

post-75081-0-80324400-1405241404_thumb.jpg

post-75081-0-85318600-1405241428_thumb.jpg

post-75081-0-46623400-1405241444_thumb.jpg

post-75081-0-22803000-1405241464_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/445593-nsw-nissan-skyline-1995-r33-gtr/
Share on other sites

This is a seriously nice car...... love the clean look nothing over the top...... shame i couldnt find something like this when i was looking for a gtr

just looking for a straight sale no swaps?

Edited by 180sxnit
  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah. OK. I'll say the same thing I say to everyone. You do not have to use 100% throttle all the time.
    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
×
×
  • Create New...