Clutch Problem - Pedal Does Nothing

[Pr0x1mity]

So 2 days ago I drove back home from hotham after being up there for about 2 and a half months. My cars been parked for 2 weeks and was driving as per normal until I got off the freeway.

Basically at first the clutch pedal felt fairly "Rusty" to press, with weird resistance and was a bit grindy.

Next the clutch pedal went in but it didnt come back out, I pulled it back out with my foot so that the clutch could disengage.

Next the pedal did nothing. It went straight to the floor but didnt engage. Had to rev match to drive home.

Here are a few pics.

Any ideas? I don't really have the denero to get it fixed atm

[boostn0199]

From the picture looks like the slave isnt even sitting on the fork properly. Is it extended out in that pic?

[Ben C34]

Doesn't the pivot ball break and cause these symptoms?

Either way it's box off and get in there.

[GTSBoy]

Doesn't the pivot ball break and cause these symptoms?

Either way it's box off and get in there.

This. Order a Nismo (stronger) pivot. Not much $$.

[MrStabby]

Yeah the lever out the side of the box should be pushing back against the slave very hard, however, with yours its just flapped open.

[Pr0x1mity]

Sick. Looks like a fairly straight forward job!

Does anyone know if it's the 54mm pivot ball I need? I've got a 96 r33 Gtst S2 Mspec if that helps

[Pr0x1mity]

Figured it out. 54mm for turbo, 41mm for NA.

Going to replace spigot bush and thrust bearing while im in there. Will also assess the clutch and see if it needs replacing.