Jump to content
SAU Community

Recommended Posts

So, going into The Star today and noticed what initially looked like a new Jag - the front and back were obscured by posts, so don't get upset at that mistake! :)

A new Tesla Model S!

Amazing looking car, had some serious presence just sitting out the front. After a minute or two a young bloke comes over to chat to me about it, he was the Tesla rep.

It is one of 4 in the country and they are doing test drives out of The Star at the moment because they dont have a Sydney office. He asked if we wanted to go for a spin around the block.

He didn't have to ask twice.

Two things grabbed my attention when I got in, the first was the massive screen in the middle. I'm writing this on a 22" monitor and if it was flipped on its side I reckon it'd be similar in size. All controls in the car are performed through this screen and it has user profiles to set the car up just the way you like it (screen display, climate control, seat position etc.)

The second thing was that this felt very much like a German car. The doors 'thud' when they close, the interior finish was impeccable, the leather was gorgeous - I had expected something of a luxury Jeep kind of interior and I was very pleasantly surprised.

Silence! Absolute silence! Seriously eery to have such little noise - especially from a car with some serious poke.

As with any decent rep, he gave it a bit of a squirt and jeezuzz .. I didn't know what to say! 0-100 in 4-point-something seconds he said, but it felt so much quicker because of the immense torque! 310kw and 600+ nm of torque! And the bloody thing still isn't making any noise!

Anyway, some pics from me and my mates phones. Bummed I didn't have a proper camera.

gallery_3_5684_300081.jpg

gallery_3_5684_319153.jpg

gallery_3_5684_1170777.jpg

gallery_3_5684_381021.jpg

gallery_3_5684_457074.jpg

$185k as it sits but he said the base model will start from $100k which I reckon is pretty good.

  • Like 1

I drove the Model S at the star and it was damn quick. We were cruising along the Anzac bridge and the rep said to tap it to the floor quickly, which I was all too happy doing. The faster you put your foot down the faster it picks up.

The max torque at all speeds made for an incredible rolling pickup of speed. It would have to rival most cars in the same price range for response.

Besides the instant torque, it also doesn't need to shift down a gear or 3 in order to maximize acceleration.

I agree with the impression of finishes and inclusions. Was very roomy, with 2 boots, a panoramic roof and a great steering wheel.

You can cover the whole interior in alcanatra and carbon which would look awesome.

I'm actually going to drive it again with a relative tomorrow.

For the equivalent E or 5 I think you're getting something way cooler, faster and more unique in the Model S.

Tesla have also priced the car equivalent to the US price adjusting for shipping, FX and local taxes and that's it. None of the gigantic marking up conducted by most other manufacturers.

  • Like 1

For the equivalent E or 5 I think you're getting something way cooler, faster and more unique in the Model S

Agreed.

Although, that being said I am still not convinced that electric is the way to go (I'm much more interested in fuel cells - hydrogen) and I have no idea what the reliability is going to be like.

I wonder from a 'wise' dollar investment point of view, what the depreciation will be like on this?

Might other manufacturers come out with a competitive "undercut" which then termites the Tesla S's value?

Depreciation rates in the US have been similar to the comparable euro cars, which isn't great.

In Australia, Tesla will be such a low volume manufacturer that I doubt the competition here would give themselves a haircut when they're probably booking a 30-50% premium to "fair value" currently.

It's just scary how much luxury car tax adds to the whole equation. It's about ~$20k on a $180k car. Scam!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • Something coarse-ish. 180 is good.
×
×
  • Create New...