Jump to content
SAU Community

Hks 3037 On Rb25 Neo

Mitch34

By Mitch34,
in Engines & Forced Induction

 Share

Recommended Posts

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Didn't really want to make a new topic but seems although there's hardly any stuff on the hks3037s these days.. Thinking of putting one on my rb25 neo and just thinking will it be worth it in the end?

I ran the Garrett 3037 which is basically the same turbo as far as i know... Made good power, not too bad with lag etc...

The variables all depend on the supporting mods, the turbo is only one piece of the puzzle.

There are heaps of threads that cover this sort of topic!

Check the RB25 results thread if you need more info on setups!

Lithium Grand Master

Lithium

Posted
Posted

Yeah, basically that. Given they are probably still sold with HKS tax I would probably look at one of the Hypergear boltons which seem to make similar power with similar lag and are as easy (or easier) to bolt on to the stock location - while being much cheaper.

Nice turbo, I love the old GT3076Rs but I guess it depends on what why you are specifically considering the HKS versus the good alternatives out there that weren't available when it came out

jjman Mentor

jjman

Posted
Posted (edited)

search = awesome.

http://www.skylinesaustralia.com/forums/topic/120893-full-turbo-kit-rb25/page-2

otherwise, have you driven a car with a GT30x series turbo on it? If not it is the main thing I would say you should do.

Of course we all want the most power but its the lag that is the defining thing on deciding a turbo for your needs.

After driving one on an RB25 (HKS3037 ProS- unknown specific model/trims) I found it to be too laggy for how I like a street car to behave.

Also I would go with a turbo now that is well suited to running E85 and set the response level I want on the turbo and then exploit the E85 fuel in making more power.

With Hypergear turbos, or even GT3071/6R, where they are at now and vs the HKS tax they just aren't worth it...

Edited by jjman
Tonba Rising Star

Tonba

Posted
Posted

^
Agree with #@34GeeTeeTee in that the turbo is only one piece of the puzzle. And as #@Lithium said, it is a solid turbo, but IMO it might not be worth it with the 'HKS tax' these days...

You might be happier with a more modern turbo setup, such as a HTA3076R (look at #@34GeeTeeTee setup) or even a EFR7670 with internal gate (personally I would LOVE to see this turbo on a unopened RB25!!)

  • Like 1
jjman Mentor

jjman

Posted
Posted

The money side of things dont phase me as the turbo is second hand with very low kms. I've been considering highflows etc but I want to do it right the first time

ahh, so its not just a matter of turbo choice from the multitude out there but also the fact you have an option for buying a good and cheap 3037?

Again, have you been in the car it came off or in a car with this exact turbo on it?

As has been noted before, many people have ended up pulling bigger turbos off their RB because its just not much fun for the street and their driving style...

Mitch34 Collaborator

Mitch34

Posted
  • Author
Posted

Yes I have been in many and 1. All I want is results/details on the hks3037...and makes it a lot easier as it's a bolt up situation. I know a garret 3037/3076 and highflows are a cheaper option etc. the car is a street/track option so I'm not overly fussed on lag etc atm.

GTSBoy Grand Master

GTSBoy

Posted
Posted

At risk of disobeying the thread owner........This 3037 would want to be really cheap to be justifiable, wouldn't it? I mean, what you're looking at with one of these is an old school non-billet compressor and otherwise old tech in a secondhand package. For not much more than a grand you can get HG to make you a sweet billet bolt on, and for a bit more than that the FP/HTA stuff is also much closer to the leading edge of turbo tech (and probably not actually any better (read that as worth more) really than HGs stuff either).

jjman Mentor

jjman

Posted
Posted (edited)

At risk of disobeying the thread owner........This 3037 would want to be really cheap to be justifiable, wouldn't it? I mean, what you're looking at with one of these is an old school non-billet compressor and otherwise old tech in a secondhand package. For not much more than a grand you can get HG to make you a sweet billet bolt on, and for a bit more than that the FP/HTA stuff is also much closer to the leading edge of turbo tech (and probably not actually any better (read that as worth more) really than HGs stuff either).

agreed.

what is the ball park we are thinking of putting out there people?

full working condition good model HKS3037 pros with the HKS dump pipe and an intake pipe for $1000? any more is not worth it?

-the reason I am making it such a low price is that you are talking about a 2nd hand turbo. It is a risky proposition as you cannot tell what is has been through nor able to work out if it is indeed in good working order unless you take it to a turbo technician for a strip down and check...

Edited by jjman
Lithium Grand Master

Lithium

Posted
Posted

In terms of results, a mate of mine got a .68 HKS 3037 tuned on the same dyno as I had my .82 GT3076R tuned on. On the same boost he made similar power with similar spool on the same boost, picked up slightly better down low and I made slightly more power. Basically in the dyno results thread you can ignore the HKS bit and look for GT3037 of GT3076R (not high flow, genuine Garrett T3 IW ones) and count those results as for the same turbo - the a/r will obviously just change the flow/response bias.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PLYNX
      Short shifter r34

      By PLYNX · Posted

      Don't do it if your gearbox box has already having syncro issues. The short hifter will put a greater load on them. If you must I remember Nismo did a shorter shifter, with the top part being physically shorter and the part that went into the gearbox was the same as stock. In saying that I've had a C's short shifter (I think) in mine for many years, which was given to me as the previous owner was not sympathetic to the gearbox. Thus forwarned I was careful and had to modify my normal changing style. You have to be super accurate with your clutch and shifts
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Well, after a week of daily driving and having to crawl out between the wheel and the side intrusion bars. I got myself a quick release setup. I went with an NRG short hub and Quick Release with some cute heart cutouts on the pull tabs. Nice and matchy matchy with the rest of the interior accents I have going on.  The only downside is the total stack height even with the short adapter is longer than the old HKB boss kit. Luckily I had some adjustment left on the column so move the wheel away.
    • robbo_rb180
      Short shifter r34

      By robbo_rb180 · Posted

      stock shifter with new bushes, springs and cup will improve it. Gktech do all the bits. The opinion as the years have gone on is the redline is not great in old gearboxes.
    • drifter17a
      Short shifter r34

      By drifter17a · Posted

      Hi all   what short shifter do you use on your skykine r34?   my synchronous does have a problem and i was getting huge delay and grinding sound between 2nd and 3rd, did put shockproof red heavy stuff and it is great now/ no issues   would in your view short shifter screw this up?   people seems to suggest/ use cube short shifter and there is standard and premium. Seen review of premium as much better and less play. Thoughts?
    • GTSBoy
      R34 oil and timing belt change

      By GTSBoy · Posted

      Yeah, there's a bit of a density and friability difference between pebbles and any of those other things. Silicone will definitely float in oil and so will be mobile enough to move around. Although, again, if it is upstream of the filter it really shouldn't go any further. I would only ever worry about silicone when it is in places downstream of the filter. Upstream of the pickup is a whole 'nother matter. We've all seen what that does. I have seen the most abominable crap settled out in industrial gearboxes, trunnion lube systems and the like, without any sign that any of it has touched anything in the machine. Just chilling in the bottom, waiting for the inevitable operator error that causes the whole machine to need to be dismantled for repairs.
×
×
  • Create New...