Jump to content
SAU Community

What Tyres?


Recommended Posts

Hi All,

I have finally bought an awesome 2008 Dark Blue 370GT SP Coupe from Yokohama. I just want to be well prepared for compliance

to ensure fewer postponements ;)

The front Tyre dimensions are very rare! Front: 225/45R19 / Rear: 245/40R19

I can't just get anything.. to ensure I get the right ones that match the Tyre placard

Any suggestions will be greatly appreciated.

Thx in Advance,

Marty

Link to comment
Share on other sites

Hey Marty.

I use Achilles ATR Sports on my 19" on my v35 skyline coupe. They're good bang for buck tyres. I order them through this website: http://www.thewheeldeal.com.au/product_info.php?cPath=279_274&products_id=2413.Not bad in terms of pricing. Shipping is about $80 depending on where you are. Hope this helps.

Hieu

Link to comment
Share on other sites

Are you sure that is the correct size for the front - the 225/45R19 is actually a larger diameter (685mm) than the rear 245/40R19 (678.6mm). I would expect the fronts to be 225/40R19 (662.6mm), to give the correct staggered fitment. If it had 18" rims I would expect 45 profile front & rear.

  • Like 1
Link to comment
Share on other sites

Hi GeeDog, Yep 100% correct.

Maybe to allow for the Big 4 Pot brakes?

This is from compliance.

Wheels
10-spoke Front: 19x8.5” / Rear: 19x9.0” Type S and SP coupe

Front: 225/45R19 / Rear: 245/40R19T base model, Type P coupe
Brakes
Front 4 Pot caliper, 355mm rotor / Rear 2 pot caliper, Type S and SP coupe

Edited by N3ptuNe
  • Like 1
Link to comment
Share on other sites

Hi

HiEUmungus

I have used the Achilles ATR on my TRD Aurion, I wanted their Sport 2 series but they don't make a 225/45R19

Edited by N3ptuNe
Link to comment
Share on other sites

Hi GeeDog, Yep 100% correct.

Maybe to allow for the Big 4 Pot brakes?

?? How can tyre profile allow for larger brakes?? that is all Rim size...

Link to comment
Share on other sites

I don't know, was just a guess mate. This is the 100% correct dimensions for a 2008 370GT SP Coupe though. I even looked up the 370Z and there the exact dimensions! but in a R18
I cant answer why there different dimensions sorry, I'm a network Engineer :woot:

Also Supports me :P
http://www.jlimports.com.au/nissan-skyline-v36-370gt-coupe

There frigging hard to find came across 2 or 3 as opposed to the rear which comes in many flavors and colors metaphorically speaking.

Edited by N3ptuNe
Link to comment
Share on other sites

Sure.. I can't help with tyre sizes or confirm if those tyre sizes are correct, but I can tell you that tyre profile has no impact on space avaialble for brakes.. Tyres go on the outside of the rim, brakes go on the inside, so only rim size will influence this.

Chances are 18in rims fit fine on the base model with the smaller brakes, but the type S and SP may need the 19in wheels to fit the larger brakes.

  • Like 1
Link to comment
Share on other sites

It seems an unusual combination - previous models (350GT) had staggered sizes with the fronts being smaller than the rear - in width & diameter - hence my post. Definitely not for brakes - the 19" rim takes care of that .

If it was mine I would strongly consider changing the front size to 235/40R19, if the width fits in the guard ok (and it's only 10mm wider). This size is 14.5mm smaller in diameter than the stock size - and the rules (in SA at least, but pretty sure it's Australia wide now) allow for +/- 15mm from the largest or smallest sizes listed on the placard. Being on the front it won't affect the speedo reading, and I wouldn't expect it to affect the ABS/DSC - someone else may know more about this. The 7.1mm difference in tyre radius is negligible - it would be like having new tyres on the rear & bald ones on the front. 235/40R19 is available in several brands & models at reasonable prices.

I know virtually nothing about getting through compliance, but would be surprised if tyre size changes within the road rules were not allowed. I'm sure someone with more knowledge will be along soon.

  • Like 2
Link to comment
Share on other sites

I totally agree with you all regarding going 245 However will Compliance comply? seeing the placard is stating 9x8.5” / Rear: 19x9.0 I would hate to buy some nice Dunlop Direzza's or Pirelli Pzero's and the compliance bloke says sorry mate aint gonna fit em they dont comply.. Know what I mean?

Edited by N3ptuNe
  • Like 1
Link to comment
Share on other sites

Yeah I just called the guy, Friendly dude. He said usually he'll have no dramas fitting something else and playing around with the placard. He said just wait as he will get tyres at trade price.
One less stress...

Link to comment
Share on other sites

  • 2 weeks later...

G'day mate,

You are spot on with The sizes. I just purchased an Australian Q60 S coupe (this is top model spec, same as 370GT SP in Japan)

Wheel & Tyre

• 19-inch 5-triple-spoke alloy wheels (P225/45 R19 Front & P245/40 R19 Rear)

Front Rim Description 19x8.5

Rear Rim Description 19x9.0

The Base Model Q60 or in Japan 370GT

18 inch 10 spoke alloy wheels • (P225/50 R18 Front & P245/45 R18 Rear)

I will hopefully let you know tomorrow what brand.

  • Like 1
Link to comment
Share on other sites

Just fitted 245/45 R18 all round on my 370 sedan yesterday. All fitted perfectly even on the different sized wheel.

Then I noticed that the compliance tyre placard has listed 225/50 R18 and 245/45 R18 as legal front tyre...

Nitto Motivo's by the way... Shipped from Sydney and fitted locally for just under $ 1,000.. Very happy and looking forward to quality non-comliance tyres..

  • Like 1
Link to comment
Share on other sites

Will do Colin.

They might be getting a bit scarce as when I first asked Taleb Tyres about them, they told me that they didn't have any and were not able to import any more. Then they found the ones they sold me, and put the remainder on their eBay store. Otherwise it would have had Invo's for about the same money.

They already feel better than the Chineses tyres that went on for compliance, but will have better idea once all the mould release stuff has worn off.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...