Jump to content
SAU Community

Melb Member,need Help, S1 R33 Gtst. Will Trade Beer/money/performance bits


Recommended Posts

I AM HAVING TUNING PROBS WITH MY SERIES 1 GTST. I WOULD LIKE TO SWAP OUT SOME PARTS TO ISOLATE THIS VERY ANOYING ISSUE MY MECHANIC CAN'T WORK OUT($900 LATER). I NEED A S1 AFM, A SET OF COIL PACKS AND AN IGNITER TO TEST WITH FOR 10 MINS. I INVISAGE DRIVING TO YOURS, SWAPPING THE BITS GOING AROUND THE BLOCK AND THEN GIVING YOU HEART FELTS THANKS AND PROBABLY SOME DOLLARS/SLABS OR IF INTERESTED A WEEK OLD UAS COLD AIR INTAKE AND O2 RUSH RACE POD. BIT OF A LONG SHOT BUT I'M SURE SOME POOR BASTARD HAS BEEN IN THIS POSITION BEFORE.

THANKS GUYS

STEVE. 0411 403081 [email protected]:)

yeah if you post your problem we could give you an idea.

but first thing to check is your plug gap if your runnig over 8 psi this should be sewt to .8 mm not the default 1.1 mm.

if the idle is bad and inconsistent ie going from 1000 rpm to 2000 rpm then your afm could be the culprit.

also the coil packs and the the ignition apmlifier if the car is running rough. the crank angel sensor could be the problem if yua re loosing power over a certain boost. factory timing should be @ 15o .

nex t I would be looking for a mechanic how knows skylines cause this guy obviously doesn't .

last one is to check the cooler piping is ok.

meggala

All pipes/intercooler pressure checked , correct heat range (7)and gapped plugs, reset ecu, Manifolds checked and tightneed, turbo removed and checked. Dynoed and mixtures seem solid at 11%(S-AFC installed and waiting for tweaking). When its warm(weather wise) it will pull through the rev range smoooth and hard in all gears, when its cold(weather wise), starts missing as it pulls higher boost even in second(high boost means 10psi in my case, no where near factory cut off). AND, fuel pressure tested under load OK and boost gauge tested as well?????? I tell ya it annoying but at least I know whats NOT wrong with the buggar!!!:D

  • 1 year later...

I Have the SAME Problem as this... Cold = Miss, Hot = Fine!

I Tried a BOOST Controller and its WAY Worse (even at stock boost levels) !!! I thought it might be the Ignition module not being able to handle the extra boost from cooler air???

I currently have .75mm gap which makes it drivable... but, on a 20deg day it misses under 60% > 100% Throttle (around 4500 RPM+)... on a 25+ day it does not miss a beat...

the_tonkau: if you manage to fix this PlEaSe! let me know what it was as I am in a simular position... no parts to swap... no mechanic who knows.... etc etc...

Could be a lot of things and maybe a combination of two issues but my fix was(after lots of piss farting around, a faulty ignition module that was breaking down at higher boost! Dr Drift at BMT Motorsport (www.bmtmotorsports.com.au) found the problem!

Good luck

Steve

Needless to say it is been shaming SS Commodores and the such, left right and centre since the super mega drifto tune! Hey Dr, when you putting the NoS bottle on the BMW?...haha hehe hoo hoo....Shit I'm funny.

Easy.

No, unless you made one up out of a Sultana Bran packet, but I don't think that would be a great conducter of ..........."currents"........hahahaha !! hehe

Once again...DR DRIFT @ www.bmtmotorsports.com.au" DO IT!

Nightman,

The funny 'the_tonkau' used our last igniter module, but I still have a spare AFM, CAS, coil packs, etc if you want to try and find the problem...

The most common mis-fire problem I've seen is plugs, follwed by coil packs, follwed by CAS, followed by igniter module...

Doc.

  • 3 weeks later...

How much are all those parts to replace, Doc? I may have to visit u next time with Lucky in his Slug of a Soarer :(

I have the same problem, and only running 11psi, and getting my ass kicked @ the lights :) Definatly losing power :mad:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...