Jump to content
SAU Community

Engine Problems!

dalaughingbuddha
 Share

Recommended Posts

dalaughingbuddha Explorer

dalaughingbuddha

Posted
Posted

Hi Guys,

I've got an 06 350GT Sedan with a strange engine problem.

I had a problem where i would be driving at any maintained speed and the car would start surging violently, i took it in and had the throttle body reset which solved the

surging but now i've got a new problem.

When i accelerate from a stand still regardless of if the car is warm or not as i accelerate the engine feels like its going to stall like the engine is starving, i put my foot down and it backfires and away it goes.

it doesn't do it all the time but its getting annoying and i'm worried its damaging the motor.

I always run 98+ fuel from BP or Shell.

Does anyone know what the problem is or anyone in the western sydney area that can diagnose it?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/446162-engine-problems/
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Lack of fuel, too much unmetered air... There could be a hundred reasons. Fault finding like this can be a headache without a Consult3, it might be worth taking it to a mech. Where are you located?

Intank injector cleaner won't unblock an injector, the only way to test them is to see the spray pattern and measure the output flow. If you were local I could do it for you cheap, otherwise if you can rip them out and get an injector specialist, or ship them down to me, they can be easily cleaned and tested.

Have you changed the fuel filter at all? 8 years on the original might be pushing it, but if the fault is intermittent... I doubt that is the cause.

Could be a bad plug or earth problem. You could get the voltage at the injector plug checked.

Like Alex said, a vac leak could be the cause, especially as it seems to be low down more so than up high in the revs. Check the brake booster isn't leaking, or some hose hasn't snapped by pressure testing the intake.

The AFM could be dirty or covered in oil, especially if you have a gay K+N pod hanging off it...

Link to comment
https://www.sau.com.au/forums/topic/446162-engine-problems/#findComment-7352967
Share on other sites
dalaughingbuddha Explorer

dalaughingbuddha

Posted
  • Author
Posted (edited)

PN-Mad, any recommended mechanics int he area that could diagnose and fix it? any idea on cost?

Scotty, i'm in Western Sydney and there is no gay K+N hanging off anything lol. Engine wise car is stock.

Edited by dalaughingbuddha
Link to comment
https://www.sau.com.au/forums/topic/446162-engine-problems/#findComment-7352970
Share on other sites
PN-Mad Grand Master

PN-Mad

Posted
Posted

PN-Mad, any recommended mechanics int he area that could diagnose and fix it? any idea on cost?

Scotty, i'm in Western Sydney and there is no gay K+N hanging off anything lol. Engine wise car is stock.

I would start with anyone with a smoke machine/intake pressure tester, and a obd2 reader.

Hijack

Scotty, what do you recommend using to clean the AFM?

AFM/MAF cleaner.... ;)

There is a product. Brake cleaner is too harsh and can leave a residue.

Also, you can't resolder a vq35 afm. It's a little different to a RB.

Link to comment
https://www.sau.com.au/forums/topic/446162-engine-problems/#findComment-7353076
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

I would start with anyone with a smoke machine/intake pressure tester, and a obd2 reader.

AFM/MAF cleaner.... ;)

There is a product. Brake cleaner is too harsh and can leave a residue.

Also, you can't resolder a vq35 afm. It's a little different to a RB.

^^ This.

CRC do an AFM cleaner. Make sure you let it dry well before plugging it back in, as it has a microprocessor inside.

Link to comment
https://www.sau.com.au/forums/topic/446162-engine-problems/#findComment-7353252
Share on other sites
colin.ssc Mentor

colin.ssc

Posted
Posted

AFM/MAF cleaner.... ;)

There is a product. Brake cleaner is too harsh and can leave a residue.

Also, you can't resolder a vq35 afm. It's a little different to a RB.

=P totally knew that...just thought any specific brand

^^ This.

CRC do an AFM cleaner. Make sure you let it dry well before plugging it back in, as it has a microprocessor inside.

CRC? Ok shall have a look...think I should clean mine one of these days considering I have the shitty K&N pods

Link to comment
https://www.sau.com.au/forums/topic/446162-engine-problems/#findComment-7353285
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      That ring thing is interesting how it's holding everything together 
    • elir32
      Rv37 400r questions

      By elir32 · Posted

      Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Butters
      UniClutch

      By Butters · Posted

      Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • NZ-GTT
      R34 GTT Battery Relocation To Trunk

      By NZ-GTT · Posted

      I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Dose Pipe Sutututu
      UniClutch

      By Dose Pipe Sutututu · Posted

      Damn... Not the feedback I want to hear.
×
×
  • Create New...