Jump to content
SAU Community

Recommended Posts

Hey guys, im going to turbo my na RB25/30 DE, im only going stock stuff for the moment. so std rb25 manifold turbo etc... ill get custom downpipe made because im sure it wouldnt fit. only thing im confused about is the turbo and water lines on the rb30. does anyone have pictures on where they go or any advice on where they go on the turbo? ive never done it before and id like to know before i start exactly where everything goes ! cheers guys

Link to comment
https://www.sau.com.au/forums/topic/446421-rb2530de-to-de-t/
Share on other sites

Or not. Anyway it will be interesting.

I hope your running e85.

There's an entire section dedicated to rb2530 conversions.

Pretty much all are turbo so it's easy to see by the pics where the oil feed and drain goes. There's even a pdf on how to do the conversion.

You could run low boost. Really low. Like less than 5 psi. With good intercooling and a large rear side on the turbo (to reduce exhaust backpressure) you could probably do even more than that on 98, but no-one around has much experience with running high static comp and much boost. So the limit will not be well known. On E85 you could well be able to run quite decent boost.

A large exhaust side on the turbo will dull response a little, but it's already a high comp twin cam 3L, so it shouldn't be too bad off boost. And the tradeoff when it starts making power will be well worth it.

If it were me - I wouldn't be using the standard log manifold. I'd be trying to make a decent manifold with nice anti-reversion steps at the head face and 6Boost style merge collector to try to keep the exhaust flow as clean as possible. Big fat dump pipe and cat to get the backpressure as low as possible.

definitely listen to gts boy.

big turbo, big rear housing on said turbo, low boost, aftermarket manifold, external gate 50mm minimum. 3.5" dump pipe minimum

with compression around the 12s i wouldnt go smaller than a GT35 size and on 98 fuel I'd be more inclined to use a 1.06 ar turbine housing

I dont know why they would say it would be fine to run low boost if it would damage something, although i am a bit scared to do it and it all end in tears.....

it's fine.. all comes down to tuning, fuel type and cooling hardware

Honda boys have been turbo charging their motors since forever.

I purchased a std rb25 turbo today and standard manifold. i wanted to get it running and upgrade it later, ill get a custom dump made up because the standard one wont fit anyway for my car im going to rebuild the turbo too since its not running at the moment. im not looking for major boost or power just something to give it an extra kick. i was intending to race the car but now have changed it. just want it a good weekend cruiser. 200rwkw is enough and its making around 160rwkw in n/a form now im sure 4-6psi on 98 will be over that mark. ill keep you guys posted how i go and what i decide to do though.

A large exhaust side on the turbo will dull response a little, but it's already a high comp twin cam 3L, so it shouldn't be too bad off boost. And the tradeoff when it starts making power will be well worth it.

Thats the thing, this thing is a pig ! unless you are over 4000rpm it has nothing at all. its a weird setup it needs to be revved to keep the thing going.

And just how are you getting 160rwkW from a 25/30? The 2JZ is an eminently better twin cam 3L than the dirty 30 ever was, and they are doing well when they are making >140rwkW NA. I'd need to see massive cams, special exhaust and inlet stuff on your engine to go close to believing it.

It really depends on the chamber, and how many hot spots there are for detonation to occur. The VQ35 is a pretty good modern design and still had issues, mainly as the rods couldn't take it.

The 12:1 comp FT86 engine can handle plenty of boost as the direct injectors don't spray fuel until after top dead centre, No fuel, no det.

And just how are you getting 160rwkW from a 25/30? The 2JZ is an eminently better twin cam 3L than the dirty 30 ever was, and they are doing well when they are making >140rwkW NA. I'd need to see massive cams, special exhaust and inlet stuff on your engine to go close to believing it.

Its got custom cams , oversize valves custom extractors and 3" exhaust.... last made 153kw atw i just found the dyno sheet....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, if I need to fit people in a car I'll just use the Mrs car, the MX5 is perfect for what I need as a fun little sports car for fun on the street As for getting in and out of the MX5, I have no issues as I am a short arse who does lots of mobility training 🥷 If anything, I have been looking at Daihatsu Hi-Jets for a work hack, I helped one of my mates move some stuff with one recently that he picked up from Just Jap, it was a little ripper and plenty big enough for what we needed, it would also be super handy for me as I do alot of gardening, and plan on having some veggie patches and native gardens in the place I buy next year when I retire I did alot landscape gardening and growing veggies prior to my current job, and loved it, and that is a hobby that can keep me sane in my retirement, and as such, the little 300kg load capacity would be more than enough for what I need it to move around I have been looking at utes for just this purpose for a while now, and a near new 2024 Hi-Jet can be had for under $30k And I would rather look at a quirky little Hi-Jet than pretty much any other little ute, well, apart from a Brumby, I love the little Brumby, and weirdly have never owned one yet I was going to buy a heap of raffle tickets to try and win the Brumby that MCM built for Subaru Australia, but sadly I totally missed the raffle, I even filled in some form to be told when the raffle started so I could buy tickets, but to my dismay I was never contacted and found out I missed it when I was randomly googling Brumbys last year... #conspiracy  Maybe I should just buy a Brumby for a little "work hack".....LOL I use to be indecisive, but now I'm not sure
    • Well.... it's not just "de-oxygenating". If you do that you just have, most likely, ethane. So you still need to do a synthesis step to combine a number of ethanes/ethanols to make circa-8-chain hydrocarbons. And of course you don't want straight chain HCs, because n-octane actually has a negative octane rating (ie, it's worse even than the n-heptane which sets the zero on the octane scale!), so you have to do some tricky catalytic chemistry to synthesise branched HCs. That's all doable - but it doesn't come for free. And.... it starts with ethanol, which is an agricultural product, and there will almost certainly never be enough of that as a base stock to replace the liquid fuels that are in use. You really wouldn't want to be planning to be using any more ethanol for fuels than is currently already used (in E10, E85s, etc). And ideally you'd be looking to reduce such usage, as it is largely wasteful, particularly in the stupid-ole'US-of-A where the corn lobby has organised it so that it's actually primary production corn that is used to make a lot of the ethanol, not by-products and waste, like it is (mostly) elsewhere. So, what I said about needing free-ish energy probably still applies. True synth fuels would be made from H2 and CO2, in a near reversal of the combustion process. In fact, given that the H2 would be split from water first, it actually is a complete reversal of the combustion process. But...energy intensive. The human race burns something like 1 cubic MILE of crude oil, after it has been made into various fuels. Every year. That's a simply stupendous amount of energy. Just assume that the density is 900 kg/m3, and that the calorific value is 45 MJ/kg, then that is 165.9 x10^12 MJ of energy. Or more than 10^19 Joules. You get a maximum of 1 kJ/s per square meter solar radiation falling on the planet's surface, and so if you halve that for daylight, and halve it again for average weather (highly optimistic) and then take ~25% for the very best efficiency of solar panels, then you need about 85.7 billion square metres of solar panels to generate enough electricity to replace that liquid fuel energy consumption. Each panel is about 1m2. That's a rather large number of panels. We also burn about a cubic mile of coal. We also use hydroelectric power. We also use nuclear. We also use a number of other sources, both "renewable" and not. You can kind of ignore the renewable ones (except for hydro, because it will all end up getting subsumed into pumped hydro for storing other renewables, and so it won't be the standalone renewable that it originally was), so we end up needing a multiple of the ground area number that I just arrived at.
    • Corvette thread then? Don't say I didn't predict the future again. "I love the little MX5, I do, but I just want something a little easier to get in/out of, a little more cushy and some power would be nice - I miss the V8 Rumble... I found this clean red C5 for sale recently and..." I'll do you a great deal on the next step, which is one of those but you can fit people in it, too.
    • What about renewable diesel and/or gasoline? I see some projects spinning up like de-oxygenating ethanol to make drop-in compatible bio-gasoline especially in CA. I still think the future is EVs and we should've all gone full throttle on nuclear power after the 1973 oil crisis like France. Despite 15 years of work in CA to reduce the CO2 intensity of generation with renewables our electric grid is still far worse than even "low carbon" nuclear power. ICE is pretty cool when you aren't depending on the stupid thing to be practical and reliable and cheap as possible to get you to work every day. It's kind of like mechanical watches or vacuum tube amps.
    • I just rolled over "my" first 10k km in the MX5 Every time I go anywhere it always ends up in a adventure to look at houses and find some random country roads I've been on leave since early November but unfortunately need to go back to work on 19 January Luckily though I still have a fair chunk of leave left to burn until.... Not that I'm counting 😁
×
×
  • Create New...