Fs: R34/r33 Gcg High Flow Turbo (Minus Turbine Housing)

[Malakai]

I'm selling the R34 GCG high flow turbo that I recently took off my R33 GTST. It had an OP6 turbine housing on it but it developed a crack on the waste-gate seat. It was making a solid 260 RWKW at 19 PSI with supporting mods before the housing cracked.

I have spoken to GCG and they will machine any R33 or R34 turbine housing to put on it for $165. I did get another turbo to have the housing machined and put it on this turbo but I found that it was already cracked. So screw it I'm selling it as is without a rear housing.

So the lucky buyer just needs to add their choice of rear housing and give a $165 to GCG to get a great high flow for your Skyline.

Right so the rest of the turbo is in fine condition, it's a Garrett ball bearing core, probably got about 20,000 to 30,000 klms under its belt, no shaft play, making great power before the rear housing failed.

Looking for $500 FIRM plus post or pickup for free on the north side of Brisbane. PM to arrange an inspection first of course, if you're local that is.

Photos: Comes with the Garrett 7 PSI waste-gate actuator pictured in these photos.

http://qubitonline.com/highflow/1.jpg

http://qubitonline.com/highflow/2.jpg

http://qubitonline.com/highflow/3.jpg

http://qubitonline.com/highflow/4.jpg

Edited August 7, 2014 by Malakai