Jump to content
SAU Community

Fs: R34/r33 Gcg High Flow Turbo (Minus Turbine Housing)

Malakai
 Share

Recommended Posts

Malakai Enthusiast

Malakai

Posted
Posted (edited)

I'm selling the R34 GCG high flow turbo that I recently took off my R33 GTST. It had an OP6 turbine housing on it but it developed a crack on the waste-gate seat. It was making a solid 260 RWKW at 19 PSI with supporting mods before the housing cracked.

I have spoken to GCG and they will machine any R33 or R34 turbine housing to put on it for $165. I did get another turbo to have the housing machined and put it on this turbo but I found that it was already cracked. So screw it I'm selling it as is without a rear housing.

So the lucky buyer just needs to add their choice of rear housing and give a $165 to GCG to get a great high flow for your Skyline.

Right so the rest of the turbo is in fine condition, it's a Garrett ball bearing core, probably got about 20,000 to 30,000 klms under its belt, no shaft play, making great power before the rear housing failed.

Looking for $500 FIRM plus post or pickup for free on the north side of Brisbane. PM to arrange an inspection first of course, if you're local that is.

Photos: Comes with the Garrett 7 PSI waste-gate actuator pictured in these photos.

http://qubitonline.com/highflow/1.jpg

http://qubitonline.com/highflow/2.jpg

http://qubitonline.com/highflow/3.jpg

http://qubitonline.com/highflow/4.jpg

Edited by Malakai

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Stock rb25det neo questions

      By Wazmond · Posted

      Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • GTSBoy
      RB25DET Engine Oil Dipstick Length

      By GTSBoy · Posted

      3 or 4 8-balls in the sump?
    • DraftySquash
      RB25DET Engine Oil Dipstick Length

      By DraftySquash · Posted

      Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
    • PLYNX
      Is this saveable r32 gtr seat

      By PLYNX · Posted

      Yes I as well would like to find out where I could get some of the seat material with the red or blue small squares in it
×
×
  • Create New...