Jump to content
SAU Community

Consult port PC interface

tang0

By tang0,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

paulr33 Grand Master

paulr33

Posted
Posted

it depends on what you want to mointor and how if you have on dash tv (i do hehe) you can get hks camp which does engine monitoring tv video out rca lead so you can easily run it to a tv on the dash or lcd screen. the unt is about $400 and reads basic info rev speed fuel water temp etc its another $400 for addon to read extra stuff then about $80 for each extra item like exhaust temp boost pressure oil pressure as they dont come from the ecu

  • 3 weeks later...
paulr33 Grand Master

paulr33

Posted
Posted

yeah u can. the connector is the same as the connector used in the nissan pulsar n14.

it the plug used toi connect door wiring to the car wiring (somewhere internal) and its about $25 AUSD. You need to modify it a tiny bit but it works perfectly

  • 1 month later...
NewKleer Mentor

NewKleer

Posted
Posted

the r34 might be using the later consult 2 protocol, so may be incompatible

ive ordered the parts to try this myself. have any of the guys who said they are giving it a go themselves, got one working? what did u do for the pcb? (is there like a prototype pcb like disck smith have that u can get it on easily (without need for custom pcb)?

NewKleer Mentor

NewKleer

Posted
Posted
i got one from plms consulting, works fine, came prebuilt and tested fine

workes on r33 series 2 consult fine

any idea if the components/layout match the schematic (http://www.plmsdevelopments.com/images_if/...ult_if_rev3.pdf) or if theyve changed at all?

particularly whether the voltage reg, 78L05 (rated for 100ma) holds its cool or not (theres 7805 rated at 1A which is an alternative)

was asking moreso about those who made it themselves (as theyd know the answers to most of the questions by others making them themselves...) for things like what pcb they used

NewKleer Mentor

NewKleer

Posted
Posted
Yes it will work on R34 GTT and GT.

Tom

after more reading, the earlier versions of the interface dont work due to too low a resistor value (r1) which is now gone to 6.8k from 4.7k in the latest schematic from plms

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R33 fuel setup

      By r32-25t · Posted

      I used the radium thing, makes the whole parallel assembly a lot more compact compared to any other way of doing it 
    • TurboTapin
      R33 fuel setup

      By TurboTapin · Posted

      Racetronix also sells those ethanol content sensor bypass blocks. Adapter, Flex-Fuel E85 Sensor High-Flow Bypass, In-line No Sensor (ADF-FLEX-NS): Adapters - Flex Fuel | Racetronix Ethanol content sensor are originally designed to be on the feed line. These bypass blocks are meant to be ran in the feed line and not return. The continental ethanol content sensors have a 3/8" ID and not 5/16". This is why they are ran on the return line directly in conjunction with a low threshold sampling value VS in the feed with one of these blocks.    Haha we think alike, I used both original feed/return for 8AN feed, and one of the Hicas lines as a 6AN return. I also capped off and left the other Hicas line as a spare. 
    • -Jimmy-
      R32 gtst speedo out by 10kph

      By -Jimmy- · Posted

      Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • -Jimmy-
      My R32 Money Pit & The Headaches That Come With It

      By -Jimmy- · Posted

      Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • Lithium
      Shoota's R33 GT-R RB30/26

      By Lithium · Posted

      This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
×
×
  • Create New...