Jump to content
SAU Community

Deatschwerks Injectors Any Good?

yoshiii335

By yoshiii335,
in Engines & Forced Induction

 Share

Recommended Posts

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

^ haha all good :)

The thread did digress a little - DW Top Feed Injectors I haven't had experience with, however it does look like re-manufactured Bosch injectors... Similar to other top feeds.

SimonR32 Grand Master

SimonR32

Posted
Posted

I have DW 1200cc top feed injectors in my GTR and used to have in my Gts-t... Both idle like stock and work very well for economy and power! I had some DW 770cc top feeds in my old RB20 as well, also perfect.

I know a few people who have also jumped from Bosch 2000cc injectors after having issues with idle and them blocking over to DW 1200s and now having no issues at all

GTSBoy Grand Master

GTSBoy

Posted
Posted

I have DW 1200cc top feed injectors in my GTR and used to have in my Gts-t... Both idle like stock and work very well for economy and power! I had some DW 770cc top feeds in my old RB20 as well, also perfect.

I know a few people who have also jumped from Bosch 2000cc injectors after having issues with idle and them blocking over to DW 1200s and now having no issues at all

Yeah, but to be fair, DW 1200cc and the Bosch 2000cc are basically the same technology bracket, and the 2000s are just far too big for most applications.

Defending the DW 1200s is a bit off topic when the criticism raised against DWs was specifically against the old side fed shitters.

  • 1 year later...
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

REVIVAL OF AN OLD THREAD!

Is anyone running the 950cc injectors? I asked my tuner today just waiting for a response.

Has anyone had any experience with these since this thread last died off?

side feed or top feed?

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Sorry!

Side feed - I'm trying for the stock look with ease of installation.

don't do it, you'll want to stab yourself in the eye afterwards.

Just go top feed, 1/2 height ones fit under the plenum nicely and you can get all black fittings rail etc.

kingtube69 Experienced

kingtube69

Posted
Posted

I can appreciate that top feed are good and all but I don't want to have to hand the tuner a kit and say "Here you go, piece it together for me" I'm just worried something could go wrong (I guess most tuners should be capable though?)

scotty nm35 Grand Master

scotty nm35

Posted
Posted

11mm rail with adapters?

Fake Sard reg?

There are better ways to convert to top feed using a 14mm rail and shorter half height injectors. ;)

kingtube69 Experienced

kingtube69

Posted
Posted

11mm rail with adapters?

Fake Sard reg?

There are better ways to convert to top feed using a 14mm rail and shorter half height injectors. ;)

Scott, I'll message you later tonight to discuss if you have some free time.

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

11mm rail with adapters?

Fake Sard reg?

There are better ways to convert to top feed using a 14mm rail and shorter half height injectors. ;)

lol what a hater, I gave you measurements for nothing :)

I use a Turbosmart FPR1200 anyhow. Got that Sard FPR free so I used it.

boostn0199 Grand Master

boostn0199

Posted
Posted (edited)

I can appreciate that top feed are good and all but I don't want to have to hand the tuner a kit and say "Here you go, piece it together for me" I'm just worried something could go wrong (I guess most tuners should be capable though?)

Its very easy 14mm aeroflow rail with short spacers, 1/2 height xspurt injectors, reg, few fittings and hose and done. For around the $1000 mark you will have everything you need to drop straight in.

But yeah talk to Scott and he will get you everything you need to drop straight in for good price.

Edited by boostn0199

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Stock rb25det neo questions

      By Dose Pipe Sutututu · Posted

      That's right, simple but works. Run out of load? Rescale the table lol. Want to be lazy and not rescale? Drag the K
    • IM-32-FK
      Feedback on Carbonetics: R34 GTT cooling panel

      By IM-32-FK · Posted

      @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • MBS206
      Stock rb25det neo questions

      By MBS206 · Posted

      Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
    • blind_elk
      [VIC] RB20DET Block

      By blind_elk · Posted

      Gone.
    • EC04
      R34 Skyline Knee Pads

      By EC04 · Posted

      €1.300    €
×
×
  • Create New...