Jump to content
SAU Community

Recommended Posts

Ok now this has me truly stumped drove my cat fo work today all is fine as normal. When I just started my car I noticed the headlights wouldn't come on then all the warning lights came on no speedo rev counter cluster lights off no display in what gear I'm in and indicators not working. Sorry no cel light but. At check, abs, 4wd and hicas are all on the abs unit make a weird winding up noise about 20 seconds after start up then stops and light comes on.

So as you can expect I'm freaking out and stumped on even where to start.

Yeah starts fine just the sytoms listed. The battery was changed a couple months ago so no probs since then. Checked fuses as good as I can in the dark I don't have a torch on me tonight so the battery fuse box is hard to read. It starts headlights take a while to come on no gear display getting error code 805 clutch position circuit or 1805 brake switch. No immobiliser so it can't be that.

Stumped :'(

I've had the christmas lights dash before plus a few other weird things. Battery.

Was your gear selector display up and running when this happens to you mate. Mine is blank can't select gear and speed taco and dead on 0

Oh, I geddit.

It's been absolutely pissing rain down in Syd.

I bet you've got water in one of your fuse boxes. Check behind the batter, and also in the bottom of the RHS drivers footwell.

Make sure all drain holes are clean and clear, and leave the covers off for a while to dry it out.

Sorry, don't remember about the gear selector as too many years ago. Even though the battery is very new, I'd get it checked/swapped simply to rule it out.

It has been passing down last night and the few days prior to but driving today all was well.

I'll check fuses in foot well and battery compartment in the morning can't see anything at this time. It's to dark. I know about the fuse box in front of the battery in that compartment is there another further back behind the battery is there?

I think there is only one in there.

Front back side whatever, I can't remember! :D

But I think it's more likely the foot well one. The muck clogs the drain at the bottom of the guard.

Have a good look around, and report back.

I think there is only one in there.

Front back side whatever, I can't remember! :D

But I think it's more likely the foot well one. The muck clogs the drain at the bottom of the guard.

Have a good look around, and report back.

There is actually two fuse boxes in the battery box. Second one is kinda behind and to the side. Wheel arch side

So no luck! Checked all fuses all are good drained the battery well it was blocked up but not up to the electrics checked footwell fuses all are good aswell. Checked battery that's goid. So guess nissan or auto electrician is next!? :-S

Searched again I'm getting error code p0805 clutch position sensor and brake switch as codes brake switch would be due to brake cut mod. Anyone know anything about clutch position sensor?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
    • Yeah pretty sure they are m4, but best to check, and perhaps use new hardware Also don't over torque them......there was that one time I lost an expensive engine after a workshop overtorqued one of those bolts and it ended up in the oil pump (no, I don't know why they removed the intake mesh either)
    • I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
×
×
  • Create New...