Jump to content
SAU Community

Recommended Posts

Hi Guys,

Thought you guys could help me with this.

Getting a GTR complianced and apprently there is a problem with xenon bulbs in the R34 - they are not auto-leveling and hence need to be converted to regular lamps. Ok fine, but when I asked the compliancer to give me the bulbs when he has finished the conversion he said he has to destroy them under government policy. He even mentioned that they will get audited in regards to destroying parts that need to be replaced on cars for compliance reasons.

I personnally think he is yanking my chain - how the hell is the government going to audit "garbage"? Will the compliancer need to keep an every growing pile of "useless" parts until he gets audited?

I just want to know what I should do. I figure the car is mine/the dealers before the compliance, therefor anything removed from it still belongs to the owner.

Thanks guys.

The complier is absolutely correct, they are only allowed to comply totally standard cars and non-standard bits have to be destroyed...and they need proof that they were destroyed.

However....it was really brought in to stop ppl having a big turbo or similar, pulling it off for compliance and then putting it back on straight afterwards.

As I understand it your best solution is to put standard lights in before it goes to the compliance workshop...then neither you nor they have a problem....

I'd make sure I was standing when he destroyed the bits, never know could be making big dollars selling them off on the side (some shonky people are still about!).

But yeah I'd change them out before it got complied.

i imported my skyline under the new import rule and i didnt get anything destroyed...car was put totally bak to stock...then i paid him just the labour to stick everything bak on after it passed the blue slip....doubt the goverenment cares if u have them or not they are more worried bout it bein complied with stock parts so it cost the buyer a shit load to change things bak and forth...

oh yeh i forgot.....wen i took it to the RTA road worthy centre place to ge it all checked out.....the guy didnt even notice that the racing arms were left on wen he checked the underbody and that it was missin the R33 S2 air box not the S1 air box.....shows u they dont really now wats meant to b on an import and wats not...

Pentae didn't u buy a R34 GTR? i'm sure GTi-R's never came with Xenons unless after market...

And there is more to it than just changing "the lights" If you swap bulbs, powerpacks must be un-hooked and new ones put in for halogen bulbs. Otherwise, 4 door R34 halogen light ASSEMBLY's are needed. The entire headlight assembly. Can't just throw halogens in.

My compliance place isn't sure what they're doing with this yet, i told them there is a evidence package around for swapping powerpacks and halogen bulbs. So hopefully, i can keep em.

cheers.

Gohan: No, didnt end up buying the R34 GTR.

My GTiR I purchased at the start of the year came with aftermarket Xenons.

flight: I'd say your compliancing house is just trying to go by the rules. It would be a national tragedy to not pass compliancing on a $80,000 GTR.

Pentae didn't u buy a R34 GTR? i'm sure GTi-R's never came with Xenons unless after market...

And there is more to it than just changing "the lights" If you swap bulbs, powerpacks must be un-hooked and new ones put in for halogen bulbs. Otherwise, 4 door R34 halogen light ASSEMBLY's are needed. The entire headlight assembly. Can't just throw halogens in.

My compliance place isn't sure what they're doing with this yet, i told them there is a evidence package around for swapping powerpacks and halogen bulbs. So hopefully, i can keep em.  

cheers.

The compliance place I am using is modified the existing assembly to accept halogens. Unsure about which specific components are being changed/removed. I will find out because inevitably I will be changing them back to xenons. Just want to find out how much it is going to cost me.

What do you mean by evidence pack?

thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have one and it was at ~43.5PSI.
    • Put a pressure gauge on the fuel rail.
    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
×
×
  • Create New...