Jump to content
SAU Community

Strange Problem, Easy Solution. K&n Filter + Maf Issue.

Kanaric

By Kanaric,
in Engines & Forced Induction

 Share

Recommended Posts

Kanaric Enthusiast

Kanaric

Posted
Posted

Never had a problem like this before in any car. Basically the car was going into limp mode and intermittent loss of power above 3000 RPM. TL;DR the MAF was getting the filer's oil on it causing it to lose functionality, had to clean the MAF often with MAF cleaner and the car ran fine for a few days. I live in vegas where it gets 40+ degrees regularly so maybe that causes the oil to become more fluid and causes this problem. It's just weird. I've NEVER had this problem before with a K&N filter. Had a WRX and 350Z both with oiled filters like this and neither of them had an issue.

I guess this is a "cool story bro" post but it's just something ridiculous to me so I felt the need the post it.

Kanaric Enthusiast

Kanaric

Posted
  • Author
Posted (edited)

Or put the correct amount of oil (not much) onto them. Heaps of people use them no worries.

This was out of box, didn't even put anything on it.

Is there anything I can use to reduce the amount of oil on there?

Edited by Kanaric
scotty nm35 Grand Master

scotty nm35

Posted
Posted

This was out of box, didn't even put anything on it.

Is there anything I can use to reduce the amount of oil on there?

Yes, you can bin the crap and use a decent cotton element, like Blitz/Greddy etc. Even a paper element would be better than the K+N.

Cassbo Grand Master

Cassbo

Posted
Posted

K&N allegedly do extensive testing on their oil and filters against MAF sensors. If you believe that the filter is the cause of the problem, contact them for an explanation or refund.

http://www.knfilters.com/MAF/massair.htm

I've had a K&N filter in my R33 for years and I have never had a problem.

Ben C34 Grand Master

Ben C34

Posted
Posted

Should I contact them to replace all the AFM's I have blown from running them, and all the customer's ones? I am sure they would love that email. lol.

Yes. If you have a problem caused by an unsuitable item it is their responsibility to rectify it.

Just email them. How hard could it be?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • pogman
      George's R33 GTST build

      By pogman · Posted

      small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
    • DraftySquash
      Help Understand GTT Boost Setup

      By DraftySquash · Posted

      Me coming to check the thread to see if my manual boost controller was set up correct......  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Ah yes but were you responsible? In the time I've had it (just before Christmas) I spun off the track twice and drove into things twice, so four separate incidents.. in two outings. Luckily I have a full OEM GTR front end to put on which is hopefully not a precursor for further, future, more expensive mistakes to come. It is some consolation that anyone who would want to buy my Altia bar would have to paint it anyway, the guards, too. (if they can get over the asymmetry). Hopefully over the weekend I will disassemble and see how badly things are bent. From what it looks like, the headlight has actually just been pushed back and bent the headlight support (which .. somehow... crushed the guard in). I guess the headlight plastic is strong stuff.
×
×
  • Create New...