Jump to content
SAU Community

Recommended Posts

small_zps8e8060d2.jpg

-Full 3' exhaust

-Custom built holset hrc35rs turbo

-Frontmount

-Pod filter

-Wallbro 500hp fuel pump

-G4 link ecu

Im about to go for tune and want 270 kw, should i upgrade stock injectors or is this within there range?

Also are there any mods i should be seriously looking?

-Thanks

Link to comment
https://www.sau.com.au/forums/topic/448230-my-2002-r34-gt25-t-build-injectors/
Share on other sites

ok gona get deutschworks 440 r34 high flow top feed injector, anyone able to recomend a boost guage option for r34 as my stock one wont read more then 10 psi, am i able to easily replace one into the current dash guage box?

Edited by r34lyf

Are you planning on using E85 in the future?

Modern injectors are nice to use and idle really well when you compare them to the older school injectors. I have old school 480cc Nismo's in the yellow pig but they make 275rwkw comfortably FWIW.

Read some of the injector threads and you will be in a better position to make a decision that suits you.

  On 04/09/2014 at 12:25 AM, r34lyf said:

so stainless exhausts cause a shit engine sound, if the only stainless part is dump pipe will it cause any harmonising, or no difference? Otherwise il get a custom made dumppipe

LOL! Who told you that?
  On 04/09/2014 at 12:25 AM, r34lyf said:

so stainless exhausts cause a shit engine sound, if the only stainless part is dump pipe will it cause any harmonising, or no difference? Otherwise il get a custom made dumppipe

  On 04/09/2014 at 12:51 AM, r34lyf said:

Engineers, who build cars in ther spare time

1387725859359.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
    • Put a hand on an injector and see if that's what the buzzing is. You might be triggering the injectors by moving off idle command.
×
×
  • Create New...